ATC 90 Motor. rare!

[lardog]

Yes I think this is a johnnys speed & chrome frame also .. Did you see it in 3wheeling magazine march 1982 ?

[shortline10]

Yes I think this is a johnnys speed & chrome frame also .. Did you see it in 3wheeling magazine march 1982 ?

I dont have that copy of march 1982 . I believe I found it in my 1980 spring 3wheeling mag .

Is their a write up in that march 1982 mag or just the ad ?

[lardog]

There is no write up but the rear inside cover has a large ad with all the goodies from jsc....

[shortline10]

Yeah The JSC frame is a really nice frame and probably the lightest frame made . The way it was designed its different than most aftermarket frames. Its stretched about an inch in the middle section and not just at the neck and the bearing carrier sits up a little higher also so basically the frame sits different than any other rigid aftermarket frame that I have seen . Are you gonna use an aftermarket front suspension kit on any of them .

[lardog]

This frame is definately unique i think the motor sits lower than some of the other frames...front suspension is a possibility....

[shortline10]

This frame is definately unique i think the motor sits lower than some of the other frames...front suspension is a possibility....

Here is my JSC frame

[lardog]

I like it .... I need to get my jsc bike done soon....

[Vealmonkey]

Ok, now you have me. What is a complete pauter kit? What must I do to try and obtain one of these complete pauter kits? I don't have a pauter kit, but I have a much lighter frame than that though.

[shortline10]

These are rare? I thought they were common because I have 10 complete pauter kits on my shelf still in the box.

I think he's trying to get 10 goats in his barn LOL

[shortline10]

These are rare? I thought they were common because I have 10 complete pauter kits on my shelf still in the box.

Got me confused is it Honda??? / or Shorty OOOPS I wont tell

[lardog]

NOS? NIB? Pauter Kit... WE WANNA SEE PICS

[Escanabajosh]

I dont have that copy of march 1982 . I believe I found it in my 1980 spring 3wheeling mag .

Is their a write up in that march 1982 mag or just the ad ?

them are some nice old bikes yas guys got, but i just cant get over how many people have magazines that are older then me and they still ready them,lol, i wish i had some. i always say i wish i would have been born ten years earlier (1973 instead of 1983)

[Bryan Raffa]

You guys are nuts.. with these...

[shortline10]

NOS? NIB? Pauter Kit... WE WANNA SEE PICS

If you want to see a NOS pauter 61mm cylinder kit I have one and can post pics after work .

[shortline10]

This is a NOS 61mm Pauter Piston / Alum Cylinder Kit with a venolia race piston for a atc90 . Notice piston is already cut for their stroker crank set up .