87 200x questions

[willrideanythin]

My 200x kicks over fine, But doesnt return to the dis engaged position. It staty engaged by about 1 inch, I have to pull it back by hand. It has sat for about a year and I never had this issue befor. Any ideas?

Next Id like to put some sort of throttle cover on it, Does any one know of a cover that fits? How about an updated throttle like a 400ex one. Covers for them are everywhere. Will a newer throttle fit directly on?

[honda200x1987]

I'm pretty sure your kickstart spring is a little weak, it maybe worn out or may have slipped out of the correct position. You would have to remove the clutch cover and replace that spring or adjust it.

[Aka_am]

Im not sure the throttle cover. My Dennis Kirk mag, has all honda the same on alot of stuff. Ask someone to try it!

[willrideanythin]

I'm pretty sure your kick start spring is a little weak, it maybe worn out or may have slipped out of the correct position. You would have to remove the clutch cover and replace that spring or adjust it.

I figured that, I forgot to mention I just replaced the clutch. It was fine befor so Im guessing its just out of place. Well Im hoping its just out of place.