ATC200E Big Red & ATC200ES Big Red Technical Data

[Louis Mielke]

You can view the page at http://www.3wheelerworld.com/content...C200ES-Big-Red

[IHmattIHmontana]

i have one 3 wheeler and its a 1985 250es big red and the body and plastic are thrashed and rotted but it runs and shifts like a champ and all the steel on it is in great shape and its a tanke i move trucks around with it all the time and i picked it up for $380 bucks and the guy told me it didnt run so i put a new fuel filter and fuel line on it for $8 and havent ever had any more problems

[Bigtyny]

anybody know were to get the trailer with the big tires on top I would like one I have a 83 200e I am fixing

[Big Red Drew]

i got a 1984 big red 200es and it feels like it has more power than a 250sx with a ported and polished head

[jubejube]

i got a 1984 big red 200es and it feels like it has more power than a 250sx with a ported and polished head

do u no if a 200cc trans works in a 125?

[atcevan]

Any body know how to remove the front tire on the 200e

[200 rider]

i did that to one of my 1984 200es and you have to completely take off the front forks

[200 rider]

Any body know how to remove the front tire on the 200e

you have to take off the front suspension pieces

[200bigred]

if the timing is off just a little will it cause my big red not to run cuz mine wont run its got spark compersion and gas

[bigmike69]

yeah. make sure its at tdc while u should hav just a lil play in each rocker arm

[jamminjimmi]

how do u take off the front shocks and stuff?

loosen up the clamps that hold the fork boots and take off the nuts that are under the fork legs then your wheel brake and fork legs will come off. make sure you take off your front brake line, then you take the 2 bolts loose that are under the fork boots that hold the dampers and the springs in place.

[Johnhacko]

I need to replace the clutches in mine 84 200 es shaft. Any info would be greatly appreciated . Or a schematic Or a step by step maybe. Local Honda shop wants 100 just to look at it. I know it cannot be adjusted any further please save me lol

[EthanD16]

Ive got a 84 200es that wont go into reverse. Any ideas? or is there some sorta special procedure you have to go through? Any ideas help.

[longbow]

what 8" wheel is the same bolt pattern and width as the stock wheel on a 200 es?

[Fat Texan]

I'm trying to figure out where I can buy replacement dampers and springs for my atc200es. I know there's a way...has anyone found it?