Nice bike. I like to get some rims and tires like you have on it now. What size rims and tires are you running now?
Registered User
New to the board
Nice bike. I like to get some rims and tires like you have on it now. What size rims and tires are you running now?
Power User
Got the holeshot
Your going to eat brakes,but will be sweet.must see when done
1985 ATC 250R.Team Red Trike
Just Too Addicted
Arm chair racerJust too addicted
brakes, hahahahaha thats funny
1985 Honda Big Red 250es Swamp Edition
1985 Honda 350X/400X
http://s779.photobucket.com/albums/y...zyquadrider83/
http://community.webshots.com/user/mondexbruteforce
First Time Rider
Arm chair racerNew to the board
I am building it to be unstopable remember? Ha ha!
In all honesty I am planning on adding a disc brake.
Was thinking of putting he disc brake on the front but modexbrute had a good point on saying that when you have he front tire in the air I ain't going to do you any good. So a rear disc brake will be in the disant future.
Freaking Honda drum brakes never last on any atv they produced. At least they never last in he mud.
Got The Holeshot
Arm chair racerJust too addicted
if you arent making it through the holes with those zillas then i think its time for a 4x4 quad
proud owner of a trx300ex quadand an 85 atc 70
First Time Rider
Arm chair racerNew to the board
A quad? Blasphemy! Shame on you! Lol
At The Back Of The Pack
Arm chair racerFirst time rider
air ride suspensions are ok on jeeps if the person is towing a lot... this guy in our jeep club has it on his 4 door rubi.. its nice he can change the height but it limits it flex a lot.Originally Posted by skiffy
The mock up is only for the rear. I will, of course, raise the handlebars as well. And yes I have to extend the front forks more to the fit the 29.5 swamplite that is going on the front.
This is a minor project as I have fabricated and installed air ride suspensions for Ford superdutys and jeeps. I used to build semi milk transport trailers for a living so fab work comes easy. It just come with my old career
At The Back Of The Pack
Arm chair racerFirst time rider
Skif hows that CAMO wrap sticking still good? I know MOx says his is peeling off already. Did you use a removable or permanent cover and what mfg.?
Power User
Lord of the trike
Oooh... Thems fighting words! JK
No trikes. Too old, too crippled. Unless I find one I can't live without!
"You cant fix stupid" ~ Ron White
My feeback link: http://www.3wheelerworld.com/showthr...ack-for-Thorpe
Just Too Addicted
Arm chair racerJust too addicted
Hopefully I too will see a rear disk brake setup on my trike in the distant future!
1985 Honda Big Red 250es Swamp Edition
1985 Honda 350X/400X
http://s779.photobucket.com/albums/y...zyquadrider83/
http://community.webshots.com/user/mondexbruteforce
First Time Rider
Arm chair racerNew to the board
Ok so I have the bike apart and am in the process of raising all the mounts for the tank, seat and rear fenders. Should have all of that done tomorrow. I am loving the idea of sitting up higher, more out of the water.
I am going to lift it 4 inches.
The wrap is holding up fine, For reson it bubles on my plastic tank, I just pop the buble and re-stick it. I used the non permanent because it was thicker and thus mor durable.
I will get pics of the build by tomorrow night.
The 400ex carb is on the way too. We will se how that works out.
Just Too Addicted
Arm chair racerJust too addicted
can't wait to pics!
1985 Honda Big Red 250es Swamp Edition
1985 Honda 350X/400X
http://s779.photobucket.com/albums/y...zyquadrider83/
http://community.webshots.com/user/mondexbruteforce
First Time Rider
Arm chair racerNew to the board
snorkel
First Time Rider
Arm chair racerNew to the board
First Time Rider
Arm chair racerNew to the board
Reply With Quote
