Results 1 to 9 of 9

Thread: just bought honda atc 125m tires turn off ground but when on ground wont move

  1. #1
    Join Date
    Mar 2010
    Location
    fargo north dakota
    --
    16

    just bought honda atc 125m tires turn off ground but when on ground wont move

    just bought my newest member to my collection and have a problem im not expeirenced in block up rear end tires turn go thru gears but when i sit on it and try to move goes no where thinking cogs worn on sprocket or chain issue please help never worked on rear end of these and help would be great thanks .

  2. #2
    Join Date
    Oct 2007
    Location
    Minneapolis mn
    --
    4,067
    Is your chain too tight?
    No trikes. Too old, too crippled. Unless I find one I can't live without!
    "You cant fix stupid" ~ Ron White
    My feeback link: http://www.3wheelerworld.com/showthr...ack-for-Thorpe

  3. #3
    Join Date
    Jan 2010
    Location
    Beaver Falls, PA
    --
    2,666
    please use some punctuation... my head hurts now

  4. #4
    squirrel1182 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2010
    Location
    Derry, Pennsylvania
    --
    253
    i had that problem with my klt 200c but it was just because clutch cable was too tight. In case id first check and make sure the chain aint too tight. and if everythings good there id take a look at the cintrifucal clutch.

  5. #5
    Join Date
    Mar 2010
    Location
    Pacific NW
    --
    4,255
    Quote Originally Posted by hotscrape View Post
    just bought my newest member to my collection and have a problem im not expeirenced in block up rear end tires turn go thru gears but when i sit on it and try to move goes no where thinking cogs worn on sprocket or chain issue please help never worked on rear end of these and help would be great thanks .
    Have both hubs spun out the splines at the wheels?

  6. #6
    Join Date
    Sep 2004
    Location
    Alberta, Canada
    --
    215
    With the back end in the air the wheels turn. Once back on the ground it won't move. Check the front brake for proper operation. Could be seized.
    Does the front wheel turn? It could be front wheel bearings. Does it roll at all?

  7. #7
    Join Date
    Jul 2005
    Location
    leroy, new york
    --
    1,025
    hubs stripped out?

  8. #8
    Join Date
    Jun 2008
    Location
    Lewiston, N.Y.
    --
    1,477
    Bearings could be bad and when the force of the bike applied they just lock

  9. #9
    Howdy's Avatar
    Howdy is offline Putting Priorities in Order, Busier than ever. Catch me if you can
    Join Date
    Sep 2002
    Location
    Celina, Ohio
    --
    10,079
    Too little information given to accurately figure out the problem.

    here are some possible things it could be:
    Bad clutch
    Bad gears
    Bad sprocket (s )
    Stripped shafts ( axle, output, )
    Ect.

    To accurately help we need info such as: ( while tires on the ground ) does it try to move? Does it make any noises? Is so, where are they coming from? ect, ect....
    The more info we get the better help you can or will recieve.

    A few properly placed: ",,..!!::??" wouldn't hurt either.
    Howdy

//ArrowChat Integreation Code //