Results 1 to 3 of 3

Thread: 86 250sx swingarm race plate

  1. 04-02-2010, 10:16 AM #1
    m brater
    m brater is offline New to the board Arm chair racerNew to the board
    Join Date
    Feb 2010
    Location
    indiana
    --
    64

    86 250sx swingarm race plate

    I am trying to figure out best way to get out the metal plate behind the races in swing arm. I hate to drill into it, don't want metal pieces winding up in new bearings.I know the plates are throw away. Is it possible to bash it through and out the other side,any one tried this?
    Reply With Quote Reply With Quote
  2. 04-02-2010, 12:27 PM #2
    Dirtcrasher's Avatar
    Dirtcrasher
    Dirtcrasher is offline Power User Catch me if you can
    Join Date
    Oct 2002
    Location
    Northeast
    --
    17,489
    It's very thin, smash it through...............

    Then fill the void with a large wooden dowel (so it won't eat up all your grease) and then tap those 2 holes in the center tube for a grease fitting. You'll never change them again!
    All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
    Reply With Quote Reply With Quote
  3. 04-02-2010, 11:27 PM #3
    Name Brand's Avatar
    Name Brand
    Name Brand is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Jun 2003
    Location
    Anchorage/Homer, Alaska
    --
    480
    We just covered this here; http://www.3wheelerworld.com/showthr...ht=#post850293
    15T3FN1 CE/FI/SI with a Class A; Some of you might know what that means.



    1986 ATC 200x, Gathering parts for a 200sx build.
    1985 ATC 250SX 25" tires, extended swingarm, snorkel and other mods for Alaska adventures.
    1985 ATC 250SX, Big plans for this one...
    1985 ATC 250ES, Big Red
    1984 ATC 125M's, 1.5 of 'em
    1983 ATC 110, BLUE!
    1974 ATC 70 Pink?
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //