Did you get the Web cam to work ? So your running the 56mm rocky piston /atc110 cylinder , atc110 crank ? Now with a decent carb setup it should scream .
Congrats !!!!
Power User
The day begins with 3WW
Did you get the Web cam to work ? So your running the 56mm rocky piston /atc110 cylinder , atc110 crank ? Now with a decent carb setup it should scream .
Congrats !!!!
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
At The Back Of The Pack
Arm chair racerFirst time rider
I doesn't run well with the web cam. I have to send it back. I was going to today but I got swamped with work. I have a new carb, waiting on the solder end so I can shorten up the cable.
1978 ATC 90
22mm Keihin carb
Ported intake/head
Performance cam
56mm 9.5:1 piston
110 cylinder/crank
110 cylinder/ timing chain
Front drum brakes
Brush guard
Complete rebuild to a 122cc
Complete frame off restoration.
$1400 invested
1983 ATC 110
22mm carb
Ported head/intake
Performance cam
56mm 9.5:1 piston
Complete rebuild to 122cc
Complete frame off restoration
$1000 invested
1984 200x
26 mm carb.
CR85 rear caliper
TRX hubs/rims
$871 invested
Reply With Quote