Thought i would post a pic of the start of this project. Got bored and had this parts frame so i decided to but a four cyl. four carb 500cc motor on this 200 frame. I will post more pics as i go. Let me know what you think.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thought i would post a pic of the start of this project. Got bored and had this parts frame so i decided to but a four cyl. four carb 500cc motor on this 200 frame. I will post more pics as i go. Let me know what you think.
Last edited by jrwebb8324; 04-26-2010 at 12:17 AM.
My feedback thread:
http://www.3wheelerworld.com/showthr...ght=jrwebb8324
Loves Corn.
Catch me if you can
Nice Dude.. get Midevil on that!
Roostin' Away
Arm chair racerRoostin Away
That'll be fun.
Power User
Got the holeshot
Cool, are you gonna run the exhaust in the bike position? Might be a good idea to try and tuck them up and have it wrap around the engine, unless you have no rocks where you are.
Power User
Got the holeshot
the only problem i see is the stock exhaust goes under the frame,and will be in a bad position for damage from logs and rocks.
1985 ATC 250R.Team Red Trike
At The Back Of The Pack
Arm chair racerAt the back of the pack
500cc + no suspension = death trap lol
Just Too Addicted
Arm chair racerJust too addicted
Damn, that is evil. Those Fours make good power and can be melted into a lot of ingots when they blow up. I had a blown CB550 motor and put it in my fire pit with a turbo fan on it and made my own Aluminum ingots. Used the sleeves on my shop press. How much clearance is there for the carbs??? are you running CV or roundslide linkage crabs?
You will cry, you will scream if you've heard half the **** I've seen.
Are you gonna get up and burn an X in your head?
"Cut throught the bone and cut through the wire"
Trikes:
84&85 Tecates
85 R
85 X
Support Scrapthraher Customs!!! Home of the Three Wheel Outlaws! PM me if you need a head rebuilt, valves cut, head milled or lapped!!!!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
Well I got the frame figured out today and set the motor on for a few minutes to see what all mods are gonna have to be done. 3wheelmecca I am using linkage carbs. As for exhaust i am not real sure what is going to happen yet. This is just a temp picture but thought i would post to keep everyone kinda updated. The only real big problem i have found so far is the kickstarter is going to hit the fenders.
Last edited by jrwebb8324; 04-26-2010 at 12:31 AM.
My feedback thread:
http://www.3wheelerworld.com/showthr...ght=jrwebb8324
Would rather be at the front of the train than
Arm chair racerJust too addicted
insane i love it !
Loves Corn.
Catch me if you can
Rear Flip up fenders!!!
Just Too Addicted
Arm chair racerJust too addicted
on the carbs, I meant are they CV top or slide type??? I know honda made some shotty carbs BITD on some CBs.
You will cry, you will scream if you've heard half the **** I've seen.
Are you gonna get up and burn an X in your head?
"Cut throught the bone and cut through the wire"
Trikes:
84&85 Tecates
85 R
85 X
Support Scrapthraher Customs!!! Home of the Three Wheel Outlaws! PM me if you need a head rebuilt, valves cut, head milled or lapped!!!!!
The Enthusiast.
Teaching quads a lesson
I had a cb360 350x that someone cut a notch in the fender... don't do that! better easy way is to start it then put the fenders on
Power User
Got the holeshot
Outstanding!
Just use the electric starter. Take fenders off if you have to kick it.
Kindergarden Speller
4 Wheels? Huh?
that thing is gunna be like riding a bull on speed .. lol no joke its gunna be a rough and fast ride. but i honestly love the idea of a big motor in a trike .. great project man keep us up to date. .
down to parts because i no longer have a place to ride trikes.
GIT IT RAAAGGGGG !!!!
Reply With Quote
