Results 1 to 2 of 2

Thread: Typo in owneers manual ?

  1. 05-19-2010, 05:03 PM #1
    haggard 2hundie's Avatar
    haggard 2hundie
    haggard 2hundie is offline Would rather be at the front of the train than Arm chair racerJust too addicted
    Join Date
    Feb 2010
    Location
    muscatine, iowa
    --
    764

    Typo in owneers manual ?

    i wasnt completely convinced i had my 200x valve clearance correct so i went to look at it again today , got my owners manual ( printed from here ) and service manual ( bought from ebay) to cross reference the two. owners manual says loosen the adjuster bolts , move adjusters counter clockwise till resistance is felt , then back " 1 a graduation " where the service manual says...... 1/2 a graduation , the diagram shown in both shows the same distance is the service manual correct in 1/2 grad. ?
    also there is some cheap big reds , 185 's snd a couple 200m/s's and yamaha 225DR 850$ or a 225DX 500$ OR A TRI Z 1500$ all the yamis are 85's . check out the iowa craigs list under ia city , des moines , quad cities , ans se iowa theres some good project trikes . if anyones interested
    Reply With Quote Reply With Quote
  2. 05-19-2010, 05:04 PM #2
    haggard 2hundie's Avatar
    haggard 2hundie
    haggard 2hundie is offline Would rather be at the front of the train than Arm chair racerJust too addicted
    Join Date
    Feb 2010
    Location
    muscatine, iowa
    --
    764
    oops typo in heading haha
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //