At The Back Of The Pack
Arm chair racerAt the back of the pack
Here is what I have and suggestions are welcome...
plug wrench
Allen wrench for carrier bearing adjustment
3 plugs
tire plugs
metric socket set
2 crescent wrenches just in case
PRETRIP INSPECTION:
adjusted valves
new tires
adjusted chain
new plug
gas (of course)
brakes new (fluid level is OK)
Am I missing anything????
Power User
Lord of the trike
Small tow rope/strap...
No trikes. Too old, too crippled. Unless I find one I can't live without!
"You cant fix stupid" ~ Ron White
My feeback link: http://www.3wheelerworld.com/showthr...ack-for-Thorpe
First Time Rider
Arm chair racerNew to the board
I usually carry a small flatbladed screwdriver as well for idle/air screw. Check the air pressure in all tires. But you you have pretty much everything else covered.. But i'm not 1 to talk i have done the same thing gathered all tools and left my dam helmet and gogles home..lol..
Own 86 250sx
85 350x
sold 86 250sx
110, 185s, 200s, 250es
Project 85 250r
If everyone else is looking down at you, Get a ladder..
Just Too Addicted
Arm chair racerJust too addicted
also some antifreeze for watercooled trikes and some water, to cool off something or get fine dirt off.
You will cry, you will scream if you've heard half the **** I've seen.
Are you gonna get up and burn an X in your head?
"Cut throught the bone and cut through the wire"
Trikes:
84&85 Tecates
85 R
85 X
Support Scrapthraher Customs!!! Home of the Three Wheel Outlaws! PM me if you need a head rebuilt, valves cut, head milled or lapped!!!!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
What about lunch?
Just Too Addicted
Arm chair racerJust too addicted
lol right?
I would throw in a case of Mountain Dew, and a strap for your 6-pack rack, cant carry low grade malt without it.
Also if you have a watercooled trike, some radiator sealant and maybe a air tank if you need air in your tires if you dont fill them at home/camp. If you have a slide type carb on your trike as well, bring some change if the needle jumps or to jump a solenoid.
Tie- Wraps too. If you get the big ones, you can use it as a tow strap.
You will cry, you will scream if you've heard half the **** I've seen.
Are you gonna get up and burn an X in your head?
"Cut throught the bone and cut through the wire"
Trikes:
84&85 Tecates
85 R
85 X
Support Scrapthraher Customs!!! Home of the Three Wheel Outlaws! PM me if you need a head rebuilt, valves cut, head milled or lapped!!!!!
New to the board
Arm chair racerNew to the board
I always check my lug nuts, hub nuts, and front axle nuts. Buddy lost his this past weekend, could have been really ugly really fast.
My toys
82 ATC200 - Soon to be modded, Dual head lights, open exhaust, K&N.
91 GMC sonoma - Hand made suspention, custom everything.
Would rather be at the front of the train than
Arm chair racerJust too addicted
did somebody say beer ?Originally Posted by glamy
Reply With Quote