1987 Honda Fat Cat crankcase pictures

[Klj12345]

I have a Fat Cat and i absolutely cannot find a single person that has any pictures of the crankcase gaskets. Gasket has been discontinued so i am having to make my own gaskets, but there are certain holes in the crankcase that im not sure if they should be covered up or not. Let me know if i should post pictures of the cover if there is anyone who has any info on these bikes. Thanks alot.

[petesatc]

what gaskets you looking for ???i have some

[Dirtcrasher]

I have a Fat Cat and i absolutely cannot find a single person that has any pictures of the crankcase gaskets. Gasket has been discontinued so i am having to make my own gaskets, but there are certain holes in the crankcase that im not sure if they should be covered up or not. Let me know if i should post pictures of the cover if there is anyone who has any info on these bikes. Thanks alot.

I know that they didn't make many FATCATS, and some of the 86/87 200X gaskets/o-rings may fit. But probably not the center case.......

I could be WAY off on those similarities. The 200SX had allot of 86/87 200X stuff yet still not interchangeable............. Maybe not the Fat cat, maybe so??.............

Cometic - Seems to make up anything guys want.

Vesrah - is another source.

The emails work 25% of the time. It's best to cold call them and be sweet (while begging ). Good luck and let us know!!

Lots of gaskets are made in a way just to cover dead space, if it's an oil gallery, make sure it's clear! They may but a hole to allow oil to pass between them (bet you wish you didn't scrape those beyatches off!!) What happened, why the case split??

I made a bunch of gasket makers on my lathe and exacto knife the rest but it's very hard to get perfect...

EDIT -m And without the .020 or whatever thick they are, stuff binds up...