New to the board
Arm chair racerNew to the board
i own a 83 atc 250r, i just bought it, i was having a problem with hitting powerband. I took out my reed assembly and this is what i saw. 2 curved metal pieces with holes under them was a this piece of sheet metal that looks like reeds. I bought a set of boyesen reeds, now do i take out the sheet metal piece and replace it with the new reeds or do i put it under/on top of the sheet metal. Sorry im a newbee for 2 strokes my first time working on one.
Power User
The day begins with 3WW
Take everything off the reed cage, and use the boyesen reeds with the boyesen reed stopper on top. Use some threadlock on the screws.
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
New to the board
Arm chair racerNew to the board
so i need to purchase a boyesen reed stopper too?Originally Posted by dcreel
Just Too Addicted
Arm chair racerJust too addicted
No, re-use the curved pieces. take the 3 screws out of both sides, take everything off reed block,put the bigger boyesen piece down, then the other piece, then the curved piece, then put the screws on and tighten, repeat for other side, you cant really mess it up, the screw holes are only on one side, just make sure the new pieces are flat when screwed down. There should be directions too.
85 Big Red 250ES
01 Scrambler 90 (Sons')
Past Machines:
96 Yamaha V-Max 600, 86 200x, 84 200es, 82 70, 82 200, 03 Bombardier DS650, 93 Ski-doo Formula Plus, 87 Ski-doo Stratos, 83 Yamaha XT550, 82 Kawasaki KDX175. 84 Tecate, 86 Tri-Z, 91 CR250.
New to the board
Arm chair racerNew to the board
so im reusing the sheet metal piece ok thanks
Just Too Addicted
Arm chair racerJust too addicted
if its curved yes. if its not, no. dont really understand what you mean about the sheetmetal piece.
85 Big Red 250ES
01 Scrambler 90 (Sons')
Past Machines:
96 Yamaha V-Max 600, 86 200x, 84 200es, 82 70, 82 200, 03 Bombardier DS650, 93 Ski-doo Formula Plus, 87 Ski-doo Stratos, 83 Yamaha XT550, 82 Kawasaki KDX175. 84 Tecate, 86 Tri-Z, 91 CR250.
Got The Holeshot
Arm chair racerJust too addicted
reuse the curved metal pieces with the hole which are the reed stoppers
1985 200X
66mm H&S Piston
Little Bit Bigger Cam
Bassani Exhaust
1985 350X With Bassani Exhaust
1983 Honda 200E (PARTING OUT!!!!)
1985 Yamaha Tri-Zinger
My Feedback Threadhttp://http://www.3wheelerworld.com/showthread.php?105185-Feedback-for-RodKnockRacing&highlight=RodKnockRacing
New to the board
Arm chair racerNew to the board
I dont know if they are factory but in between the curved piece and the cage is this piece that looks like reeds but its a very thin piece of sheet metal.
Just Too Addicted
Arm chair racerJust too addicted
just use the stock reed block with everything off of it, the boyesen reeds, the curved metal parts, and the 3 screws. thats it. hope this helps.
85 Big Red 250ES
01 Scrambler 90 (Sons')
Past Machines:
96 Yamaha V-Max 600, 86 200x, 84 200es, 82 70, 82 200, 03 Bombardier DS650, 93 Ski-doo Formula Plus, 87 Ski-doo Stratos, 83 Yamaha XT550, 82 Kawasaki KDX175. 84 Tecate, 86 Tri-Z, 91 CR250.
Reply With Quote