Results 1 to 3 of 3

Thread: My YTM200

  1. #1
    Join Date
    Jul 2010
    Location
    Williams Lake, British Columbia
    --
    89

    My YTM200

    I have had a YTM200 sitting in my yard, I rode it when I was 13 and it quit, so I'm 17 and It's running, but it's idling too high. How high, you may ask? too high to shift from first and if it is in gear, and I lift the back end, the wheels spin, and it jumps forward when put in first from neutral.


    a video :

    http://www.youtube.com/watch?v=CbaWdm2GHV0

  2. #2
    haggard 2hundie's Avatar
    haggard 2hundie is offline Would rather be at the front of the train than Arm chair racerJust too addicted
    Join Date
    Feb 2010
    Location
    muscatine, iowa
    --
    764
    My 200x did that the throttle cable needed some tweaking gremlins was my top suspect also what is the condition or the carb and routing of the throttle cable? when i got mine the cable was routed wrong so when i turned to the right it would revv real high if in neutral and accelerate if in gear, not cool to accelerate through a tight turn when its unexpected these are just my experiences good luck and welcome the the raddest place on the internet except porn of course lol but its a close one

  3. #3
    Join Date
    Jul 2010
    Location
    Williams Lake, British Columbia
    --
    89
    Well My carb got cleaned out and blown out, and the throttle cable was jammed to full and it was in gear when I got it running this year so it ran me over, lol. But yeah, it can't shift out of first unless I kill the motor and let it come back. while it's dead I have to shift. did I mention my front tires flatter than my ex?

//ArrowChat Integreation Code //