hey im new to this, i just got and early 80's atc 110, i was wondering if there were and motors that are bigger that swap in easly?? please help?!?!?!
Registered User
New to the board
hey im new to this, i just got and early 80's atc 110, i was wondering if there were and motors that are bigger that swap in easly?? please help?!?!?!
The Enthusiast.
Teaching quads a lesson
almost any lay down (horizontal) pit bike motor up to 140cc's or so should bolt right in, but you'd need the wiring harness, etc. from the new engine
Check my feedback before dealing with me
Roostin Away
the pit bike motors you will have to shim they are 50 and 70 size case's not the size of the 110 case's
85 Atc 70
86 Atc 125m
85 atc 350x
86 atc 250r
86 Atc 250r TT build
85 Big Red bought brand NEW
2012 Honda Goldwing Gl1800
Registered User
New to the board
i am not positive but i think you can put a 200 on that trike there are lots of them out there
Got The Holeshot
Arm chair racerJust too addicted
200's are not gonna fit easily. DR ATV sells the brackets you need for $15 to put a pit bike engine in.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Tell me about these pit bike engines. What kind of power and strength do they have? My 110 is somewhat lacking in power due to me being a big guy.
Got The Holeshot
Arm chair racerJust too addicted
I have a 140cc Piranha engine in mine. Rated at 11hp.. Makes alot of power on the top end but has decent bottom end as well. I weight around 200lbs and it will pull the front wheel off of the ground with ease. I am not sure how much you weight though. I paid around 350 for the complete engine with all electronics and carb.
Dr atv sells the adapter for $14 and if you want to use stock 110 pegs they also sell the foot peg adapter. Then you can just run a pit bike exhaust and bend it slightly to fit. I paid $60 for my exhaust
Reply With Quote