Registered User
New to the board
I just got a 1983 atc 250r and when I start it up it seems to me to be idling to high. I tried turning the idle screw down but I didn't make a difference. I took the carb apart and cleaned the jets and still the same. is there something Im missing?
thanks
Just Too Addicted
Arm chair racerJust too addicted
Air leak somewhere?
85 Big Red 250ES
01 Scrambler 90 (Sons')
Past Machines:
96 Yamaha V-Max 600, 86 200x, 84 200es, 82 70, 82 200, 03 Bombardier DS650, 93 Ski-doo Formula Plus, 87 Ski-doo Stratos, 83 Yamaha XT550, 82 Kawasaki KDX175. 84 Tecate, 86 Tri-Z, 91 CR250.
I'm your dingleberry
The day begins with 3WW
x2, and also, make sure the slide is intalled in the carb correctly and of course check for a sticking cable.Originally Posted by puggerton03
and you mentioned adjusting the idle screw....are you adjusting the screw on the slide housing, or the small brass screw on the carb body? not trying to insult your intelligence, just making sure the bases are covered.
Last edited by RIDE-RED 250r; 07-14-2010 at 09:02 PM.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
Reply With Quote
