whats the best way to adjust the air screw on my 85 tecate ??? ... i've searched the forums and couldn"t come up with anything useful.. any help would be much appreciated .. THANKS GUYS !
At The Back Of The Pack
Arm chair racerFirst time rider
whats the best way to adjust the air screw on my 85 tecate ??? ... i've searched the forums and couldn"t come up with anything useful.. any help would be much appreciated .. THANKS GUYS !
MY BABY RIGHT HERE !!! LOL
86 200x
86 250r 265cc kit
86 225dr
85 250r nice rider
85 tecate
85 atc 70
83 250R bone stock
88 cr 125
84 klt 110
99 yz 125 1st race bike
02 ktm 125sx 2nd race bike
Power User
Roostin Away
Does the 85 tecate have an air screw? My 84 does not have one.. If it is an air screw, (on airbox side of carb) Then turning it out would make it leaner, and in would be richer. However, if it is a Fuel screw (motor side of carb) it is the opposite - turning it out would make it richer, and in would be leaner. Hope this helps.
THE 80's RAGE! Currently owns:
81, 85 Yamaha Tri Moto 125
83 Yamaha Tri Moto 200 x2
82,83 Yamaha Tri Moto 175 project
85 Yamaha Tri Z 250
84 Kawasaki Tecate 250
84 Honda ATC 70
85 Honda ATC 350X
84 Honda ATC 250R
(2) 84 Honda ATC 200x
82, 83 Honda ATC 185s
81 ATC 200
Lots of other parts and bikes
At The Back Of The Pack
Arm chair racerFirst time rider
yea i've double checked mine ,and it does have a screw on the airbox side of carb , which led me to believe it was an air screw ,is it a stock carb ??? how can i tell ??
MY BABY RIGHT HERE !!! LOL
86 200x
86 250r 265cc kit
86 225dr
85 250r nice rider
85 tecate
85 atc 70
83 250R bone stock
88 cr 125
84 klt 110
99 yz 125 1st race bike
02 ktm 125sx 2nd race bike
Check my feedback before buying from me
First time rider
You want to know where the air mixture screw is or the idle adjust screw? Air screw is on the bottom of an oem carb inside the bowl. The idle adjust screw is on the side of the carb.
85 350x 12:1 piston and porting by "boosted96cobra"
4 85 tecates 1 runs
5 84 tecates none run
1 84 Yamaha Zinger, mildly ported & polished, milled, bored .25 over finally running
2 atc 90's just parts bikes
00 rm250
93 kx500
2 Honda 200m parts bikes
Reply With Quote