Basement Build. PROJECT: Eleven-Zero! All Done, pics on page 3

**Mr_RPM** · 08-01-2010, 07:53 PM

I FINALLY got my camera developed that has my 110 build in progress (also has new big red, ill make another thread)
so me and my father actually tore it down in the basement because its much cooler down there and no bugs, also because i had a foot surgery about 6 weeks ago and getting down to the barn would be more difficult.
this is the first half of the build and the other half will be done within the next 2 months.

i just need main bearings, (on the way) connecting rod kit (on the way) and engine seals (ordering soon) and the engine will have everything ready for assembly.
i plan on Powder coating the frame and....well the rest is secret for the 2nd thread, lets just say i plan on spending too much

feel free to ask about anything. ill save the big list of stuff I'm doing once its done.

**mrcribbs** · 08-01-2010, 08:08 PM

Very cool! I'll be keeping an eye on this one.

**harryredtrike** · 08-01-2010, 08:36 PM

looks like a good start to a great build.love the 110

**shortline10** · 08-01-2010, 08:56 PM

Very nice . I see lots of goodies .

**motoman1012002** · 08-02-2010, 04:22 PM

piston cam big carb Looks to be a good build you need a aftermarket frame and some front susp

**Mr_RPM** · 08-02-2010, 04:30 PM

haha yeah. well as for a frame i don't see why, im not going to be motocrossing it. as for the front suspension i might have something. it might not be done right away and ill probably have it driving around first but that might be part 3 of my build. =) we will see.

**tri-z987** · 08-02-2010, 04:35 PM

sweeet!!! can wait to see it when its done man.

**Mr_RPM** · 09-26-2010, 09:55 PM

No new pics yet but so far i have the engine done and the frame done. just to the point where i got alot of small stuff before assembly. cleaning bolts and guards and stuff like that. The project went a little slower than expected because of a money shortage but I should be good in that department very soon then i can get everything I need and the 110 will be ripping once again.
I still need to get a few things like front wheel barrings and steering bearings and just other small things. after i get it mechanically sound ill start cosmetically. i need to get the seat re-done, Im probably going to get a clarke tank and new plastics.

**harryredtrike** · 09-26-2010, 10:26 PM

should be nice when done,keep at it

**shortline10** · 09-27-2010, 04:58 PM

We need pictures

**Mr_RPM** · 09-27-2010, 05:30 PM

Been stuck with using a disposable camera (then putting them on a digital disk to upload) I have a bunch of pictures, just i still have about 15 more left on the camera, so as the trike gets farther along i take more pictures. sorry they come is spaced out chunks....how much is a decent, RELIABLE

digital camera? im broke and sick of my cameras braking (not broke enough to build up my trike though lmao)

**Mr_RPM** · 10-03-2010, 10:21 PM

so I have some bad news. we got the 110 running (in naked frame) and my dad had it running great 2nd pull and ran it for about 2 mins (i was at a mud bog with big red and wasn't home) once i got home (hours later) we started it and it ran great for about a min......then grinding sounds and we rushed to kill it. well after some looking around, basically the clutch exploded. It looks like the snap ring came out and the first metal plate came out, all the little springs got chewed up and ruined (along with snap ring). well we took apart the clutch more and the clutch plate "A" got messed up, the studs on the plate got bent up.
The only part I COULD NOT find is clutch plate "A"....so i need one. Ill have pictures probably by this weekend. anyone know what happened? any one have clutch plate "A" they can sell? I also might need a new snap ring from here too (haven't check availability yet) and everything else destroyed i can still get OEM.

but hey she runs good hahaha =P

**shortline10** · 10-03-2010, 10:28 PM

Sounds like the snap ring wasnt seated all the way . An old school trick was to use a fine piece of solid wire and drill a tiny hole in the clutch bell in a few key spots and wire the ring in so this couldnt happen . Very common problem on a race motor that likes to rev up quick . I have a few complete clutches if you need one .

**Mr_RPM** · 10-03-2010, 10:33 PM

mike, i might have to take you up on the complete clutch idea, this just happened about 30 mins ago and ill figure it all out the next few days and if my best bet is buying one from you then ill let you know.
thanks for the tip too, your a big help

**harryredtrike** · 10-03-2010, 10:45 PM

what an absolute bummer,sorry dude

Thread: Basement Build. PROJECT: Eleven-Zero! All Done, pics on page 3

Thread Tools

Basement Build. PROJECT: Eleven-Zero! All Done, pics on page 3