this one is for The Vealmonkey, myproject87 stuffed in a barn in socal
![]()
this one is for The Vealmonkey, myproject87 stuffed in a barn in socal
![]()
Gordons Well...#1 in this World, Home of "The Nick", "The Mutt", "The Husq" and "the Alky"
this one is for the Maryland Monkey...a true trike enthusiast
myfutureproject87... friggen sucks moving a wheeler with a flat front fatty
![]()
Gordons Well...#1 in this World, Home of "The Nick", "The Mutt", "The Husq" and "the Alky"
and this one is for Pat....a truly great person and friend
this is myPOShpframe87, why a POS?, because of the reputation of the manufacturer ripping off the designer and ripping off other famous frame builder/designers from back in the day....let it be known thatBill "Rocketman" Sargeant
was the biggest copy cat and crook in the world and all his frames should be smashed in the crusher, may they always carry a black mark on them
![]()
Gordons Well...#1 in this World, Home of "The Nick", "The Mutt", "The Husq" and "the Alky"
Hey Moofer, you've said alot of things are for Pat, but they've never left SoCal yet! LOL
Nicholson 500x (Project)
Nicholson 185s
Nicholson 110 (That takes an atc70 tank)
Ascott 500 head/350x (Project)
Homebuilt Racer Chromoly Suspension 110 (Ragin Runt)
PK Racing Suspension 70
A+ Inc Suspension 70
AWS Aluminum 90 frame
Hi Performance ATC Suspension frame rd350
Hi Performance ATC Suspension frame 90
Anything new to add to the thread here lately?
Side note:
Stock front axles are M12x1.25 threading. When using a suspended front end you've gotta get shouldered lug nuts (from an automobile) to fit INTO the forks to use the stock front axle. HUGE thanks to Minty for helping me out with that!
too many bikes to count. too little time on hand.
Not aftermarket,,, but is a goodie
![]()
too many bikes to count. too little time on hand.
Looking Good Chucky!!!!!
Ol Deuce
DO the Best With What you got !
My Feed back :cool
These are a few of the parts I've picked up in the last few months for a build of mine. BAPP vented dipstick and rear sprocket, CALIPER chain tensioner, aftermarket rear brake drum, IMS fuel tank, and a set of low pro fiberglass rear fenders.
1979 ATC110
1983 ATC110
1984 ATC110
1984 ATC125M
1985 ATC110 2 of them
1985 ATC110 The wife's
1987 ATC125M
1985 ATC250ES
1984 DX225 with 250 timberwolf engine and swingarm. Wolf in DX clothing
Nice the second other rear drum like that I have seen.
I recently installed my polished PCCC turbos on my Dickson Duner project. Brand new red fiberglass fenders with polished aluminum support plate.
The rest of the stuff I had in one of my stashes.