Results 1 to 4 of 4

Thread: Did the 85 ATC110 use a chain tensioner of sorts?

  1. 09-13-2010, 04:50 PM #1
    bobotech
    bobotech is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Jun 2010
    Location
    spokane, wa
    --
    363

    Did the 85 ATC110 use a chain tensioner of sorts?

    I have an 85 ATC110 that has a really really loose chain. I know it needs to be replaced but I'm just wondering if its supposed to have a chain tensioner of some kind? I went to my local junk yard and bought a tensioner off of an older ATC90 with the shaft but I don't think it works with the newer ones.

    Any ideas?
    Reply With Quote Reply With Quote
  2. 09-13-2010, 05:03 PM #2
    0GravityMX
    0GravityMX is offline BANNED, For scamming and circumventing previous bans. First time rider
    Join Date
    Aug 2010
    Location
    Cape Coral,FL
    --
    154
    84/85 110's are tensioned with the rear axle carrier. you loosen the 4 bolts holding it and tighten the 10mm bolt on the tensioner untill the chains tight then u tighten the carrier up...
    Reply With Quote Reply With Quote
  3. 09-13-2010, 06:52 PM #3
    bobotech
    bobotech is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Jun 2010
    Location
    spokane, wa
    --
    363
    I knew that part but the axle is already as far back as it can go so obviously I need a new chain, I just didn't know if it had a separate tensioner like the older models.

    So the older ones don't have the adjustable slots for the carrier like the 84/85s?
    Reply With Quote Reply With Quote
  4. 09-13-2010, 06:54 PM #4
    0GravityMX
    0GravityMX is offline BANNED, For scamming and circumventing previous bans. First time rider
    Join Date
    Aug 2010
    Location
    Cape Coral,FL
    --
    154
    correct. from 69-83 used the one attached to a rod
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //