Results 1 to 6 of 6

Thread: Need 84 Honda 200ES Electrical Info

  1. 09-19-2010, 07:04 PM #1
    2cycletriker
    2cycletriker is offline New to the board Arm chair racerNew to the board
    Join Date
    Jul 2010
    Location
    Indiana
    --
    10

    Need 84 Honda 200ES Electrical Info

    I'm getting ready to start on an 84 200ES that has no spark. Just curious about the measurements I should be looking for. What resistance should I see across the pickup coil and coils in the alternator? I have a wiring diagram and I know some about electronics but I don't know what I should be looking for. What about the coil? Low, like .3-.8 ohms across the primary and maybe 2500 or so across the secondary? What kind of voltage outputs should I see across the pickup and alternator coils as I crank the engine over? Any other "secrets" I should look for in the ignition system? Any help would be appreciated. Thanks!
    Reply With Quote Reply With Quote
  2. 09-19-2010, 07:08 PM #2
    dcreel's Avatar
    dcreel
    dcreel is offline Power User The day begins with 3WW
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    Here is your manual

    http://www.oscarmayer.net/atc/manual...0es_bigred.pdf
    Rides:
    1986 ATC250R (sectional pipe and Klemm Research silencer)
    1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
    1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
    1982 ATC70 (Lifan manual 125)
    1987 LT80 (piped, widened)


    My feedback thread
    http://www.3wheelerworld.com/showthr...ack-for-dcreel

    RIP Trace.. Godspeed.
    Reply With Quote Reply With Quote
  3. 09-19-2010, 08:01 PM #3
    2cycletriker
    2cycletriker is offline New to the board Arm chair racerNew to the board
    Join Date
    Jul 2010
    Location
    Indiana
    --
    10
    Got it...excellent. Thanks.
    Reply With Quote Reply With Quote
  4. 09-19-2010, 09:06 PM #4
    2cycletriker
    2cycletriker is offline New to the board Arm chair racerNew to the board
    Join Date
    Jul 2010
    Location
    Indiana
    --
    10
    What about the pulse generator? Anyone know what that should measure as far as resistance goes? I can't find it in the manual. It measures 30 ohms. What type of voltage or pulse should I see across the leads?The coil and alternator check good. Good voltage at the alternator when I pull the rope. All switches are functioning properly.
    Reply With Quote Reply With Quote
  5. 09-20-2010, 12:02 AM #5
    2cycletriker
    2cycletriker is offline New to the board Arm chair racerNew to the board
    Join Date
    Jul 2010
    Location
    Indiana
    --
    10
    Never mind. Turns out the spark advancer is toast. Thanks again for the link to the manual. Saved it to disc.
    Reply With Quote Reply With Quote
  6. 09-22-2010, 11:15 PM #6
    JustEnough's Avatar
    JustEnough
    JustEnough is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2009
    Location
    Elk Grove, CA
    --
    334
    How did you determine that the spark advancer is toast?
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //