small toy i built to ride around my house. still needs brakes and a rear fender.it`s a lot of fun to ride with. any ideas on a good looking rear fender?
sorry for my bad english
First Time Rider
Arm chair racerNew to the board
small toy i built to ride around my house. still needs brakes and a rear fender.it`s a lot of fun to ride with. any ideas on a good looking rear fender?
sorry for my bad english
Power User
Roostin Away
Neat, was considering something like that for my kids. What's the other 3-wheeler in the background? Is that a 'German Sheppard'?, just kidding with ya my friend.
83' 200x (son's). 85' 200 auto-x & 85' 125m (daughters). 84' Tecate(?). 85' KXT Tecate (mine!, mine!, mine!.)+ some others but don't feel like typing them in.
First Time Rider
Arm chair racerNew to the board
this thing is pretty bad a** i got on wet dirt i got wheelspin till 5th. it`s geard low. the one in the back is my 86 tecate ( street legal). my dog is a german sheppard- terrrier mix
Power User
Roostin Away
Thats a cool little bike. What does the crossbar pad on your handlebars say?
"I'm Kind Of Like The Turtle Man Of 3Wheelers."
1986 Honda 350X
1985 Honda 250R
1985 Honda 200X
First Time Rider
Arm chair racerNew to the board
it says Kawasaki an there is "bad ufo" and "future shok" on it. maybe an ufo aftermarket pad for kawasaki. it was on the kx when i bought it
Power User
Got the holeshot
nice job on your conversion.im sure someone will chime in on some fenders for your trike.make another vid wearing a helmet cause i fear this one will be removed,(rules).
1985 ATC 250R.Team Red Trike
Registered User
New to the board
could you send me pictures of the back. i want to build one but unsure how to build the swingarm. also what did you use to widen the forks? i see in the video you put a no name atv wheel on there
I can fit a square peg in a round hole. Just give me a hammer and duct tape!
Arm chair racerJust too addicted
i think thouse are the stock tripples
First Time Rider
Arm chair racerNew to the board
i machined wider triples out of aluminum for it. it also has another frontwheel now. i can pull it out of the garage on weekend and upload some pictures
Power User
4 Wheels? Huh?
Pretty cool! I am also interested in building one of these.
Keep on Triking!!!! "I am the NIGHT RIDER!!!"
RIP Ninja!
Feedback thread: http://www.3wheelerworld.com/showthr...-for-thestud25
Trike Fest 2011, 2012 Vet!
Founding member of the Haspin 6ft Bats Club!!
Trikes Currently Owned:
87 Big Red 250es
86 Kawasak KLT110. All documentation, bought from original owner.
83 Honda 200s
81 Honda Atc 70
(4) Suzuki ALT 50's
Yamaha YT 60
First Time Rider
Arm chair racerNew to the board
This is sweet, the more dirt bike conversions the better!
First Time Rider
Arm chair racerNew to the board
here are some detail pics
the hubs i machined:
The whole axle setup is bolted to the stock swingarm. the two outer pieces are turnable and the bearings are excentric so i can thight the chain by turning them. i`m thinking about building a complete aluminum swingarm.
next thing to do is lowering the rearend and put the rear fender on
the triples are machined out of 20mm aluminum and the steering stops are bolted on. the forks are off an suzuki rg 80 because they are shorter than de originals
The front wheel is off an noname atv for kids. i machined the axle and fronthub. i dont plan on using a frontbrake. the reartires are gocart raintires (they got no air in them right now)
in this pic a kx conversion is shown which uses a rearend setup that looks almost like mine. (i found this pic after i built my setup and was surprised that somebody already went this way)
First Time Rider
Arm chair racerNew to the board
so, winters here again and i finally found some time and a rear fender for it. still needs a bit of trimming but i think it looks alright in size and shape. i also added a shorter dogbone so it sits a bit lower in the rear. i already bought green car wrapping foil to color the fender. got it off ebay for one buck, i think it's for a 50cc quad. next step is fabricating new tripples to get less rake and mofe the forks forward to get some more steerig angle.
Power User
Got the holeshot
I like it. What are the rear fenders from? Are the rims all 6 inch wheels? Looks like a blast!
First Time Rider
Arm chair racerNew to the board
the front is a 6 inch and the rears are 5 inch. the front fender is a honda z 50 fibreglass fender and the rear is ??? i really don't know what it's off. but i got 2 of them off ebay for 1 buck a piece.
Reply With Quote
