T-3 question

**whiteman350x** · 10-06-2003, 10:02 PM

This has not got a nut. It is an arm with 2 studs one up- one down. buykawasaki.com just calls it arm. (Great description huh). It slides down over a pin, which is in a hole under the cyl. one stud goes in a notch on the rod that runs to the arm with the left handed nut. the other stud goes in a notch on the rod that is inside the cyl. and moves the 'valves.Prolly seems clear as mud. I we still can't get our heads together, i'll get the number off buykawasaki.com and you can look it up.

**MIK6** · 10-06-2003, 10:17 PM

I know the piece you need. I do not have a spare. I found a bent 1 in a parts motor and I lost another in the dirt floor. If I am rite the pin slides into the part you need. I have never tried to order that part. I have had my jug off and the valves apart so often that I can do it in my sleep, but typing a discription is hard as h_ll LOL. If I was better w/ my scanner I'd post a picture for you from the manual.
let me know how you make out.

GOOD LUCK
MIK6 / Mike

**whiteman350x** · 10-07-2003, 08:19 AM

Sounds like we are on the same page. Got a local bike shop trying to get one. Wish we had a Kawi dealer around here.

**Jeb** · 10-07-2003, 08:58 AM

That same "arm" is probably used in several years of KX250. It should be pretty easy to find one.

I wonder how come it to break?

**whiteman350x** · 10-07-2003, 07:11 PM

Local bike shop has ordered one for me. Hope it is the right one.

Thread: T-3 question

Thread Tools