Results 1 to 6 of 6

Thread: performance parts

  1. #1
    Join Date
    Dec 2010
    Location
    NY
    --
    3

    performance parts

    Does anyone know where to get performance parts for a Yamaha tri-moto 125, and any other accessories/ racks etc, for them?

    Dr John

  2. #2
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    Ebay, Craigslist, or post a classified ad here on the site.. you might get lucky.. Apparently there is no shortage of NOS parts for the YT125's.. You could just about rebuild one to new.. I had no idea.. That sectional for $50 is a deal..

    NOS Bassani pipe
    http://cgi.ebay.com/ebaymotors/NEW-N...Q5fAccessories

    Here's a used sectional pipe from generation cycle for $50 I'm tempted to pick that up and I don't even own one.. yet
    http://cgi.ebay.com/ebaymotors/1980-...Q5fAccessories

    UNI air filter
    http://cgi.ebay.com/ebaymotors/YAMAH...Q5fAccessories

    6 pack rack rusty sandblast and powdercoat
    http://cgi.ebay.com/ebaymotors/1980-...Q5fAccessories

    Dura Blue rear wheel spacers
    http://cgi.ebay.com/ebaymotors/Yamah...Q5fAccessories

    NOS standard piston
    http://cgi.ebay.com/ebaymotors/NOS-Y...Q5fAccessories

    NOS cylinder
    http://cgi.ebay.com/ebaymotors/Yamah...Q5fAccessories

    NOS footpeg extensions
    http://cgi.ebay.com/ebaymotors/NOS-Y...Q5fAccessories

    NOS skidplate
    http://cgi.ebay.com/ebaymotors/1980-...Q5fAccessories

    NOS front rack
    http://cgi.ebay.com/ebaymotors/1980-...Q5fAccessories

    NOS trailer hitch
    http://cgi.ebay.com/ebaymotors/Yamah...Q5fAccessories

    NOS front fender
    http://cgi.ebay.com/ebaymotors/Yamah...Q5fAccessories

    NOS front Maier fender
    http://cgi.ebay.com/ebaymotors/Yamah...Q5fAccessories

    NOS headlight bucket
    http://cgi.ebay.com/ebaymotors/YAMAH...Q5fAccessories

    Boyesen reeds
    http://cgi.ebay.com/ebaymotors/Boyes...Q5fAccessories

    NOS rear grab bar
    http://cgi.ebay.com/ebaymotors/YAMAH...Q5fAccessories

    NOS taillight
    http://cgi.ebay.com/ebaymotors/Yamah...Q5fAccessories
    Last edited by dcreel; 12-07-2010 at 03:20 PM.
    Rides:
    1986 ATC250R (sectional pipe and Klemm Research silencer)
    1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
    1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
    1982 ATC70 (Lifan manual 125)
    1987 LT80 (piped, widened)


    My feedback thread
    http://www.3wheelerworld.com/showthr...ack-for-dcreel

    RIP Trace.. Godspeed.

  3. #3
    Join Date
    Dec 2004
    Location
    Baltimore, MD
    --
    6,088
    You can find alot of parts, but plastics are pretty much non resistant. I've been looking for a yt175 fuel tank cover for a long long time. Also if you want to hop up your trike, put a yt175 top end on it, as long as it's an 82 and later yt125.
    Nicholson 500x (Project)
    Nicholson 185s
    Nicholson 110 (That takes an atc70 tank)
    Ascott 500 head/350x (Project)
    Homebuilt Racer Chromoly Suspension 110 (Ragin Runt)
    PK Racing Suspension 70
    A+ Inc Suspension 70
    AWS Aluminum 90 frame
    Hi Performance ATC Suspension frame rd350
    Hi Performance ATC Suspension frame 90

  4. #4
    Join Date
    Oct 2010
    Location
    Lauderdale County, Alabama
    --
    2,029
    Wonderful!

    I've been looking at picking up a 125, and was wondering what the performance of them stock was.
    This is my trike. There are many like it but this one is mine. My trike is my best friend, and it is my life. I must master it as I must master myself. My trike without me is useless. Without my trike, I am useless. I must ride my trike true. My trike and I know that what counts is not the amount of miles we ride, but the time we ride together. My trike is human in it's own ways, therefore I will learn it as my brother. I will learn it's weaknesses, it's strengths, it's parts, and it's soul.

  5. #5
    Join Date
    Dec 2004
    Location
    Baltimore, MD
    --
    6,088
    Faster than a honda 110 and 125. A real wheelie machine. If you get a 125, and your best bet is 82 and later yt125, then you need to at least do the yt175 front end swap. Front suspension and front brake make a big difference. Also the yt175 top end swap is pretty much a bolt on but you need the whole top end, carb, exhaust, fuel pump and yt175 fuel tank. And there are way more mods that you can do.
    Nicholson 500x (Project)
    Nicholson 185s
    Nicholson 110 (That takes an atc70 tank)
    Ascott 500 head/350x (Project)
    Homebuilt Racer Chromoly Suspension 110 (Ragin Runt)
    PK Racing Suspension 70
    A+ Inc Suspension 70
    AWS Aluminum 90 frame
    Hi Performance ATC Suspension frame rd350
    Hi Performance ATC Suspension frame 90

  6. #6
    Join Date
    Feb 2003
    Location
    Australia
    --
    927
    Bolt in a complete DT175 engine.

//ArrowChat Integreation Code //