At The Back Of The Pack
Arm chair racerAt the back of the pack
Just a quick question, what carb are you running on your b2? 38 pwk? 35 pj? let me know what your running and how you like it. A carb is one of the last parts I need to put my 250 runner together. I have a stock round slide, but was leaning towoard a 38mm airstryker. opinions?????
Power User
Roostin Away
You're lean is correct. The 38AS is arguably the best all around carb for stockish to mild 250's. They will even sustain much larger engines well if pure drag is not your intent. Great response down low and through the middle are the benchmark of them . The larger PWK is usually geared more toward the top end rush. It's easily modified due to the throat design.
Power User
Roostin Away
I am currently running a 38PWK on my 310. Running pretty good with #55 pilot and #172 main second clip from bottom, 110 fuel. Awesome throttle responce! I still needed more time with fine tuning but I am changing pipes anyways before next dune trip.
Joker 90
1970 Honda US90- aquarius blue
1981 Yamaha YT125
1986 Yamaha Big Wheel 80
1986 Kawasaki Tecate KXT500
1987 Kawasaki KXT250B2
2005 Yamaha YFZ450
At The Back Of The Pack
Arm chair racerFirst time rider
I am also looking at getting a carb for my 86 B1 and I was "leaning" towards the 38AS. There is a company on ebay that always has them for about $220 or so. I think they're called acjracing or something. Has anyone dealt with them? Is that a decent price?
T
85 250R
86 Tecate
84 Tecate
8? Tiger (sold)
3 1970 Sperry Rand Tricarts (sold)
85 250sx
83 Trimoto 175 (sold)
Just Too Addicted
Arm chair racerJust too addicted
I have found that seller just a bit pricey-if you look I betya you'll find that carb cheaper for sure.Try carbpartswarehouse.com for that carb, might be cheaper there.Also ROCKY MTN ATV has free shipping over 99 bucks currently, save a couple bucks on that.
http://www.pilotodyssey.com/PO/index.php
88 TRX LRD,39MM pwk,Durablue+4.Nice rider
85 250r West Coast +4,Durablue +4,Boyesen rad valve,Keihin 39mm,Rad double row carrier
86 250R west coast +4,Durablue+4,Maier plasitcs, Keihin, Boyesen,Wiseco big bore kit
85 350x-all new everthing,trailer queen,all OEM-NOT FOR SALE!!
4-FL400R HONDA PILOTS.See my section on the page!
2-85 T-3 Tecates all the bells and whistles
85 T-3 project trike in works
At The Back Of The Pack
Arm chair racerFirst time rider
does anyone know if a 34pj will fit in the stock intake on the 86
82 ATC 250R (AS $ Crusher.. Project 450 swinger)
84 ATC 200X (Project Blackout) Hers
86 ATC 250R
86 TRX 250R (The Golfcart)
87 CBR 1000F SSSA STREET FIGHTER
95 NINJA 250EX
My Feedback http://www.3wheelerworld.com/showthr...-Rollingmenace
Power User
Got the holeshot
running this on my t3 project,new in box was told it is a NOS tecate carb
1985 Quad Killer
1985 Mini Raag
1985 Green Gobbin X2!!
1990 Kawasaki 300sx
feedback thread http://www.3wheelerworld.com/showthr...light=code200k
If you have done deals with me please leave me feedback
R.I.POriginally Posted by Billy Golightly
Power User
Got the holeshot
a 34pj should fit
I had like 39mm VM
Also use 38 or 39 quad vent PWK and a 38mm TM
They all seem fine on stockish motors but would really shine a ported one.
But with the gearing seeming to be so short in my opinion, a 36mm PWK would be best all around.
86 T3
84 T3
86 KX250
At The Back Of The Pack
Arm chair racerFirst time rider
Thanks Mudbogger! I'll def check to try to beat that price!
85 250R
86 Tecate
84 Tecate
8? Tiger (sold)
3 1970 Sperry Rand Tricarts (sold)
85 250sx
83 Trimoto 175 (sold)
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks guys, I'm going to try out the 38 pwk. Now on the quest for a silencer.
Just Too Addicted
Arm chair racerJust too addicted
ESR is a good place to pick 1 up. they give u a hand full of jets and they will machine the back side of the carb to fit the stock air box boot. ESR.com
Reply With Quote
