New to the board
Arm chair racerNew to the board
1984 Big Red. Traded an old snowmobile that I got for free for it. Runs ok Needs a new carb. I think. Hi lo and reverse all work. Tires hold air but are a little wore. The battery was frozen. This is the second wheeler in 2 months. I got an 85 200s a couple months ago. Needed new chain and sprockets.I got all that fixed. It smokes and uses quite a bit of oil.I am thinkin top end rebuild. Anyone in Minnesota done one of these? I could do it with a little help. I will attach pics of both of them.
Power User
Roostin Away
nice couple of seat covers and some elbow grease and you will have some nice trikes
Power User
Teaching quads a lesson
Did my first ever top end by reading the manual and getting the machine shop work done by the local ATV dealer. I have some mechanical background but it was new ground on an OHC engine. The book explained everything very well. Good luck.
Trikes
1970/71 US 90 (Aquarius Blue)
1970/71 US 90 (Future Project)
1972/73 US 90 Camo Project (110 Big Bore)
1972/73 US 90 Green
1982 ATC 70
1983 ATC 70 (Ladybug)
1973 ATC 70
1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain
TF 2015
Other
1983 Honda Z50
Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
http://www.3wheelerworld.com/showthr...k-for-coolpool
Power User
The day begins with 3WW
LIES!!! :: never wear out!
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Power User
Just too addicted
And so the addiction startsWe have all been there and are still there..lol Nice bikes. Top ends are easy. Just read the manual procedure entire before you start to tear down. As stated before take any machine work to an atv shop, thats what I did. Congrats on the new toys
Reply With Quote