Registered User
New to the board
1986 big red es three wheeler help please
Hello, I have a 1986 bigred es three wheeler carb, that i have to put on and i have never done this .I have it mounted and the choke hooked up but the fule line and vacume lines i dont no where they go any help would be grateful.THANKS,to all who help on here for us newbys. THANKS again.
Just Too Addicted
Arm chair racerJust too addicted
The fuel line should be the bigger of the inlets on the carb. The vaccum lines you speak of are breather/overflow lines. Hook a hose up to each one and route it down from the carb.
'85 Honda 200X
'85 Honda Big Red 250es
'85 Honda 250R
'82 Honda ATC 70
'87 LT500R Quadzilla
BRUP!!!!!!!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
Get yourself a service manual, its really easy to figure it out with one.
1985 ATC250sx
1984 ATC200s
1984 ATC200x
HONDAS FOR LIFE!!!
Just Too Addicted
Arm chair racerJust too addicted
http://72.52.143.80/~trikes/Manuals/...vicemanual.pdf
Link to a manual for ya
'85 Honda 200X
'85 Honda Big Red 250es
'85 Honda 250R
'82 Honda ATC 70
'87 LT500R Quadzilla
BRUP!!!!!!!!
Power User
The day begins with 3WW
my sig has a ling to a manual site
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Reply With Quote