Can I get a ten inch from wheel for my 86 200x. I want to run a 22inch tire in my preference.
At The Back Of The Pack
Arm chair racerFirst time rider
Can I get a ten inch from wheel for my 86 200x. I want to run a 22inch tire in my preference.
Ride: 1986 Honda ATC 200x
Following Mods Done:
-Anodized blue block-off plate
-Factory head light and master cylinder guard
-ITP mudlite SP rear tire/Chengshin turf tamer front
-DG reverse megaphone exhaust
-UNI airfilter
-Moose bars/Protaper Grips/MotionPRO twist Throttle
-CEET classic ATC blue seat cover (should of sent it to mosh :-(...)
-Tuned Carb with a 125 main jet
-COMPLETELY restored gas tank
-RED/WHITE PowerMadd Handguards
-1/4" thick aluminum swing arm skid plate!
Power User
Got the holeshot
you can, but you can also get a 12" rim from itp. Not sure where to get the 10 inch from.
Power User
Roostin Away
I believe an 86 200X will take the same wheel as an 85-86 R. If so, look at the post by "riverrat" on how to get a 10" wheel without breaking the bank.
John
1985 Eddie Sanders ATC330r
1986 Monstecate
1984 ATC70 (awaiting 125cc transplant)
1984 ATC125M
1986 GSXR 750 - Keepin' it old school!
1999 Arctic Cat 500 4x4 plow machine
1999 Arctic Cat Thundercat 1000 (lake lizard)
1996 Arctic Cat Jag 440 L/C (ditch banger)
Power User
Got the holeshot
I have two aluminum 10 inch wheels that will bolt directly on to the stock hubs on a second gen 200x, that need a new home. Little dirty, little bit of rash on them, but other than that perfect.
This is my trike. There are many like it but this one is mine. My trike is my best friend, and it is my life. I must master it as I must master myself. My trike without me is useless. Without my trike, I am useless. I must ride my trike true. My trike and I know that what counts is not the amount of miles we ride, but the time we ride together. My trike is human in it's own ways, therefore I will learn it as my brother. I will learn it's weaknesses, it's strengths, it's parts, and it's soul.
Power User
Roostin Away
I was assuming that you wanted this 10 inch for the front, if not then you can just get a set of aftermarket 10" rears for a 250R, 300EX, 400EX, 450R, and a ton of other machines that have the same bolt pattern.
John
1985 Eddie Sanders ATC330r
1986 Monstecate
1984 ATC70 (awaiting 125cc transplant)
1984 ATC125M
1986 GSXR 750 - Keepin' it old school!
1999 Arctic Cat 500 4x4 plow machine
1999 Arctic Cat Thundercat 1000 (lake lizard)
1996 Arctic Cat Jag 440 L/C (ditch banger)
At The Back Of The Pack
Arm chair racerFirst time rider
Ya I know for the rear it's simple... I should have specified.
Last edited by Nightmare; 01-21-2011 at 07:26 PM. Reason: imbarrassing grammar
Ride: 1986 Honda ATC 200x
Following Mods Done:
-Anodized blue block-off plate
-Factory head light and master cylinder guard
-ITP mudlite SP rear tire/Chengshin turf tamer front
-DG reverse megaphone exhaust
-UNI airfilter
-Moose bars/Protaper Grips/MotionPRO twist Throttle
-CEET classic ATC blue seat cover (should of sent it to mosh :-(...)
-Tuned Carb with a 125 main jet
-COMPLETELY restored gas tank
-RED/WHITE PowerMadd Handguards
-1/4" thick aluminum swing arm skid plate!
Reply With Quote