At The Back Of The Pack
Arm chair racerFirst time rider
where do you all the lower end bearings from? i have an 85. just pulled it apart and need all the bearings. i have the crank bearings. cant find a whole kit like i did for my 85 r. i emailed and pmed atceric today. but i need these asap. im sure oem would be more expensive than aftermarket.
Three Wheels Are Better Than Four!!
My Rides:
85 250r atc
85 tri z
2012 honda rincon 680
New to the board
Arm chair racerNew to the board
try hotrods thats usualy what i order i used them in 10 different motors i have built
At The Back Of The Pack
Arm chair racerFirst time rider
sweet ill try that. thanks!!!
Three Wheels Are Better Than Four!!
My Rides:
85 250r atc
85 tri z
2012 honda rincon 680
New to the board
Arm chair racerNew to the board
yupp no prob man
Power User
Roostin Away
All balls or hot rods but nothing beats oem from www.bikebandit.com
2- 85 Tri-Z's black and Yellow
2- 85 250SX's
1- 85 200X
3-ATC 70's
2- 85 tri-zinger's who needs some parts
At The Back Of The Pack
Arm chair racerFirst time rider
neither one of those companies list the bearings i need on their website. i have emailed both. the local dealership has been closed due to the weather so ill check with them tomorrow for oem parts.
Three Wheels Are Better Than Four!!
My Rides:
85 250r atc
85 tri z
2012 honda rincon 680
Loves Corn.
Catch me if you can
OEM are the way to go!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
At The Back Of The Pack
Arm chair racerFirst time rider
also there are two blind bearings. the ones that can not be pressed out as they can only come out one way. whats the best way to get these out? special tool?
Three Wheels Are Better Than Four!!
My Rides:
85 250r atc
85 tri z
2012 honda rincon 680
Loves Corn.
Catch me if you can
blind bearing puller ,,,only way,,,well I won't say the only way ..but the right way!
At The Back Of The Pack
Arm chair racerFirst time rider
ok thanks. ill have to get one of those for sure
Three Wheels Are Better Than Four!!
My Rides:
85 250r atc
85 tri z
2012 honda rincon 680
Loves Corn.
Catch me if you can
mine was a snap-on one
At The Back Of The Pack
Arm chair racerFirst time rider
You could also try using a propane torch to gently heat the casing gently - when spit bounces it's hot enough - to make it easier.
Custodian of:-
85 Tri Z - need rear plastics to go with Mosh seat cover
83 200x - engine being rebuilt but lodging with a friend
85 250r - also lodging with a friend until I have a new shed
....and a different kind of Z
At The Back Of The Pack
Arm chair racerFirst time rider
i got a puller and got oem bearings. not cheap but i know they are good quality. thanks for the help
Three Wheels Are Better Than Four!!
My Rides:
85 250r atc
85 tri z
2012 honda rincon 680
Reply With Quote
