Results 1 to 7 of 7

Thread: Mystery 350x part?

  1. #1
    sittinguy's Avatar
    sittinguy is offline Titanium Balls Arm chair racerAt the back of the pack
    Join Date
    Dec 2003
    --
    343

    Mystery 350x part?

    I'm almost done with my 350x resto, while digging thru piles of parts, I found this (pic)

    Is this a helmet hanger? I've never seen one. The bolt that was thru it looked like a triple clamp bolt.
    Attached Thumbnails Attached Thumbnails DSC04222.jpg  

  2. #2
    Join Date
    Sep 2004
    Location
    Phoenix, AZ.
    --
    6,719
    Blog Entries
    2
    Yes it is. It bolts to the upper right side triple.

  3. #3
    Join Date
    Apr 2002
    Location
    s.w. michigan
    --
    6,498
    Yes, that is a helmet holder. Normally is on the right side of the tripples. Can't recall if it is on the upper or the lower.

  4. #4
    Join Date
    Jun 2010
    Location
    Plattsburgh, NY
    --
    2,311
    helmet holder. i thought it was upper
    TPC TRIKES

    FSU Powersports

    RNS Powdercoating

  5. #5
    sittinguy's Avatar
    sittinguy is offline Titanium Balls Arm chair racerAt the back of the pack
    Join Date
    Dec 2003
    --
    343
    Thanks, I will bolt it on later and see how it works/looks.

  6. #6
    ustin666 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Dec 2009
    Location
    moncton
    --
    237
    ya i got 1 on my 350x and it is on the top right

  7. #7
    sittinguy's Avatar
    sittinguy is offline Titanium Balls Arm chair racerAt the back of the pack
    Join Date
    Dec 2003
    --
    343
    I put it on the other day. I'm not finished with the bike yet, but I couldn't wait to see how it ran. So I bolted on the foot pegs and took it for a ride. Front brakes leaked. Got that fixed, and so far so good. Should be hanging my helmet on it by the weekend.

//ArrowChat Integreation Code //