Got The Holeshot
Arm chair racerJust too addicted
I'm working on a project and need some help. I am in search of a swingarm that is 6.75" wide at the front pivot point. So far I have the 86/87 200x at 7.5"+ and the 300ex is wider than that. Anything shorter than 7.5"?
83-85 200x, 250r, T3, 400ex, 450r, ltz400, lt250, lt500, etc - needs to be chain drive, not shaft, and I would like it to have coecentric(sp) chain adjustment.
If you have a swinger that you can measure for me that would be great - post up or pm.
Just Too Addicted
Arm chair racerJust too addicted
What are you building??
If it ain't sideways......what's the point!!
86' Honda Atc 250R - under restoration
10' Polaris Outlaw 525s - my XC race quad
05' ATK 640 "Cannondale" xc racer
00' Banshee 350
Got The Holeshot
Arm chair racerJust too addicted
Wow! 4 days, 35 views and the only post or info is someone wanting to know what I'm building...it is a dirtwheeler.
Maybe I should have been more specific - please post up some swinger measurements at the front pivot area weather they are to big for my needs or not, that will help me cross potential swingers off my list. Of course you do have to own and be able read a tape measure and own a trike or quad.
Power User
The day begins with 3WW
84-85 T3 7 7/8 bushing to bushing 7 5/8 arm to arm (no bushings)
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
Reply With Quote
