Results 1 to 5 of 5

Thread: 84 250R gearing questions . . .

  1. #1
    Toledo_Tommy's Avatar
    Toledo_Tommy is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2010
    Location
    Toledo
    --
    279

    84 250R gearing questions . . .

    What is the stock gearing for a 84R ? I'm in the process of rebuilding and i am going to replace chain and both sprockets , 13T on the front now.
    Thanks

  2. #2
    Toledo_Tommy's Avatar
    Toledo_Tommy is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2010
    Location
    Toledo
    --
    279
    Is 13T on the front and 42T on the rear stock ?
    Thanks

  3. #3
    Join Date
    Apr 2008
    Location
    NW, IND.
    --
    842
    I believe its 13/39
    80' Honda CR80R
    78' Honda XR75
    77' Honda CT-70
    74' Honda CT-70
    75' Yamaha GT80 Enduro
    76' Kawasaki KZ900
    73' Kawasaki H1-500
    76' Kawasaki H1-500
    They always run best before they blow!
    Manuals: http://www.oscarmayer.net/atc/manuals/


  4. #4
    Join Date
    Sep 2007
    Location
    Newcastle NSW Australia
    --
    139
    13/42 is stock

  5. #5
    Toledo_Tommy's Avatar
    Toledo_Tommy is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Nov 2010
    Location
    Toledo
    --
    279
    Thanks ! I thought so but wasn't 100% . I'm thinking of running a 14T on the front and stock on rear for this build. The motor is going to have this set up : MX port N polish , bored .40 over , 36mm carb , free flow air filter , reed spacer , vforce3 reeds , and DG pipe.

//ArrowChat Integreation Code //