Results 1 to 6 of 6

Thread: wheel problem

  1. 02-20-2011, 03:10 PM #1
    killerM
    killerM is offline Registered User New to the board
    Join Date
    Feb 2011
    Location
    ashland, ohio
    --
    3

    wheel problem

    i have a rear wheel that will not seal so i want to replace the wheels and hubs can i replace my 4 on 130 hubs with 4 on 110 for more wheel choices this is on my 82 atc 185s
    Reply With Quote Reply With Quote
  2. 02-20-2011, 04:35 PM #2
    dcreel's Avatar
    dcreel
    dcreel is offline Power User The day begins with 3WW
    Join Date
    Aug 2008
    Location
    OK
    --
    5,450
    I'm not positive but I think that you can use an 83-85 200x rear hub for the 4/110 spacing. Let me do some looking..

    Yes, I think the 83-85 200x hubs or 83-84 250R hubs will work. If you want a couple inches of extra width you could use 300/400EX rear hubs.

    http://www.3wheeler.org/vb/showthread.php?t=34838
    Last edited by dcreel; 02-20-2011 at 04:40 PM.
    Rides:
    1986 ATC250R (sectional pipe and Klemm Research silencer)
    1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
    1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
    1982 ATC70 (Lifan manual 125)
    1987 LT80 (piped, widened)


    My feedback thread
    http://www.3wheelerworld.com/showthr...ack-for-dcreel

    RIP Trace.. Godspeed.
    Reply With Quote Reply With Quote
  3. 02-20-2011, 04:38 PM #3
    Hurricane635's Avatar
    Hurricane635
    Hurricane635 is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Nov 2009
    Location
    Albert Turkey New Mexico
    --
    131
    Yes the 83-85 200x hubs will go right on.
    Reply With Quote Reply With Quote
  4. 02-21-2011, 01:00 AM #4
    79fordblake's Avatar
    79fordblake
    79fordblake is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    May 2009
    Location
    Wingo, Ky
    --
    278
    I switched my 185s to Yamaha wheels and hubs. 4x100 lug pattern.
    1981 Honda 185s
    DG Exhaust, Clamp on Uni Air Filter
    '85 200x carb, 200 Cylinder (SOLD)

    1981 Honda 185s
    Straight Pipe, Uni Air Filter
    200x Carb, 200 cylinder (SOLD)

    1985 Honda 250ES Big Red
    Uni Air Filter

    1986 Honda 250ES Big Red
    Uni Air Filter

    Reply With Quote Reply With Quote
  5. 02-21-2011, 08:11 AM #5
    3wheelrider's Avatar
    3wheelrider
    3wheelrider is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Jan 2009
    Location
    Miami,Fla.(305)
    --
    808
    The 86-87 200X rear hubs fit too & they look nice. Thats what i put on my 83' 185s with some douglas wheels I had. I got a good deal off ebay for the pair & had little use/wear. Try to get as new or little use as possible....most hubs have pretty worn splines.
    forgot too add: the extra width the hubs give to the rear axle is nice and helpful too.
    Reply With Quote Reply With Quote
  6. 02-22-2011, 09:11 AM #6
    killerM
    killerM is offline Registered User New to the board
    Join Date
    Feb 2011
    Location
    ashland, ohio
    --
    3
    awesome thanks for the help guys thought the 200 would work but just wasnt sure
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //