200x swingarm boltS What the

[captainweezy]

So i am taking a load of scrap in tomorrow and was going to try to save 3 swingarm bolts and a couple hubs. Guess what they are all on the frames and loaded up on the trailer to be junked. I don't know what it is with these dAM N swingarm bolts seizing up but a 20 pound sledge wouldn't bust them out. my poor wrist and arms cant do it anymore so I quit. Out of the last 10 200x's I have parted I have only saved 1 or 2 of these suckers.

[4cylinders]

hey, drill a hole in the bottom, fill with atf. let it soak, put air to it. on the big end before pressing out. this bolt cannot be turned in the frame.

[clvantress]

I hear ya......im making bushings for mine now.

[captainweezy]

Too late. Just not worth saving but that is a great idea. I will remember that though. Thanks

[4cylinders]

hey, retraction, these bolts can't turn!! they are slotted into the frame, so they will not turn.

[captainweezy]

Well I got one out yesterday. It didn't survive though because the center was too damaged from the punch i was using but at least it came out.