At The Back Of The Pack
Arm chair racerAt the back of the pack
3 questions:
1. After running bike for short time today I noticed fuel dripping from back of carb. Appears this should have a line on it? Should this be dripping fuel (I'm assuming not)?
2. In an effort to disassemble and get the rattle fixed in my headlight I cannot get this final bolt out (pictured - phillips head) - any suggestions? It just turns and doesn't seem to catch anymore.
3. Am I missing any significant part on the brakes (see pictures)?
Thanks!
Power User
Roostin Away
Your rear brake is missing the parking brake part that runs up to the bars. Mines missing that to seems to have been popular to take off I'm still looking for one.
As for the carb mine had the same problem turns out there was a piece of crap holding the float valve open just a hair from closeing so fuel would run out. Yes there should be a line there it's your overflow.
On the headlght the threads on the bezel must be striped out on that screw. Try a pair of visegrips and pull out on it while twisting it out.
Life is better on 3 wheels
1984 200es big red
1976 suzuki rm125
1983 honda 250r (minty fresh) SOLD
1986 honda 350x (A PILE....for now)
197? honda 90 (pauter framed little beast in the making)
At The Back Of The Pack
Arm chair racerAt the back of the pack
I appreciate the advice - I'll see if I can go fix this stuff now.
New to the board
Arm chair racerNew to the board
you can get a block off platefor your caliper. they are pretty cheap on ebay
Roostin' Away
Arm chair racerRoostin Away
if you have an extra front caliper you can swap it out for the rear, and have no parking brake at all
HONDA WITH A WING AND A PRAYER
1984 110 project
1984 125 parts bike
1983 honda 200x
19 85x2honda 200x
1985 honda 250sx
1985 honda 250es
polaris p3 should be a parts bike ***gas tank wanted**
Reply With Quote
