Yt60 help please

[Lotaimpalass]

I am having a few problems with my kids yt60 well actually I have a yf60 and an YT60.

problem 1 the drive gear that runs the output shaft seems to be seating to deep in the case and binding a little and making the output shaft hard to turn, when I pull out on the internal shaft with the side case off it moves ever so little and seems to be working as it should, what could cause this movment, is their a shim that could be worn out. IT seems like it did it over night and so i stoped running it and tore it down.

problem 2 oiler failed I need a cylinder and piston, What are my options?

Problem 3 The dang run start switch has broke on both bikes. and they are like 112.00 each on ebay, and is just expensive to me are their any other options or does anyone have any parts laying around.

Thanks for any and all of your guys help.

[bcredneck]

i cant beleive people still trust 20 year old mixers
you can get a switch form a pw 50 or older yamie moped
if the motor is shot you can get parts from a pw 50