Results 1 to 2 of 2

Thread: Help needed with 200E

  1. #1
    Join Date
    Feb 2011
    Location
    Grafton
    --
    2

    Help needed with 200E

    need some advice on my '82 200E. Finished the top-end rebuild, piston/rings, valves lapped, etc.
    It also has a new carby on it.
    Fault: had same problem before rebuild.
    runs a little rich at idle
    needs to have mixture screw almost all the way in to idle.(does this with old and new carbys).
    erratic miss when accelerated.
    Gave up trying to find fault and took it to the local Suzuki dealer (no Honda close). They couldn't fix. Said the coil looked OK. Suggested maybe the CDI or as a last resort, the wiring.
    Any ideas?
    Thanks.

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,811
    Put the pulse generator gap to spec . Its behind the CDI cover on the head . Might be a weak spark issue .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //