Results 1 to 3 of 3

Thread: Fuel system

  1. #1
    Join Date
    Apr 2011
    Location
    nova scotia/canada
    --
    67

    Fuel system

    Ok. So i took the advise to clean the inside of my carb. By the way. NEVER trust others to do the work for you. Someone had tried to use caulking to seal the carb, there was looses chalking inside carb and all over the float.
    I was wondering if a 1983 Suzuki LT 125 Wheeler Fuel gas petcock would fit on my 84alt125. I believe yes, because they are so similar BUT I know 83 and 84 yrs are different.
    (I hope so cause I just bought one)

  2. #2
    Join Date
    May 2010
    Location
    Wichita, Kansas
    --
    1,361
    They are both kinda rare, so i doubt many people will have that information for you. Your best bet is to go test and find out, then tell us.
    I just wanna go fast. If your not first, your last!!
    Reproducing the Tecate CDI. Contact me if you need one. I'm most accessible on FaceBook. You can find me on the 1984-1987 Kawasaki Tecate KXT250 Group.

  3. #3
    Join Date
    Apr 2011
    Location
    nova scotia/canada
    --
    67
    Ok, will do. They look very similar. I should have it in a couple days. And ill post pics of the bike too. maybe someone will know the answer to this.... When i run the bike smoke is coming out of manifold (from between muffler and engine) could that just be a gasket issue? It seems there is some oil coming out. Should i be overly concerned?

//ArrowChat Integreation Code //