//ArrowChat Code
Results 1 to 6 of 6

Thread: 82 ATC110 Axle/hub combo's

  1. #1
    jadleybray's Avatar
    jadleybray is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2007
    Location
    oregon
    --
    352

    82 ATC110 Axle/hub combo's

    What 4 bolt hubs will fit my stock 82 ATC110 axle?

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,788
    The 86/87 200x is a nice upgrade and it adds 2 inches to the width . 4x110 bolt pattern so its an easy wheel to find compaired to the 110 models 4x130 hub pattern .

    Quote Originally Posted by jadleybray View Post
    What 4 bolt hubs will fit my stock 82 ATC110 axle?
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    May 2010
    Location
    Attica, NY
    --
    451
    ALL 24 spline. Yamaha warrior, Yamaha Banshee, Yamaha Blaster etc etc
    WARNING: I'm About To Do Something REALLLYYYY Stupid!!!

    Past:
    '82 Honda 110
    '82 Honda 110
    '83 Honda 185s
    '85 Honda 200m
    '85 Honda 250sx
    '85 Honda Auto-X

    Present:
    '82 Honda 250r
    '82 Honda 250r (Basket Case)
    '83 Honda 200s (Parting out)
    '84 Honda 200x
    '84 Honda 250r (Basket Case)
    '85 Honda 350x (currently being built)
    '85 Honda 350x (waiting to be built)

    Future:
    '83-'87 200x's (wish list)
    '86 Honda 350x (eventually)

  4. #4
    jadleybray's Avatar
    jadleybray is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2007
    Location
    oregon
    --
    352
    thank you fellas

  5. #5
    Join Date
    Feb 2010
    Location
    Visalia, CA
    --
    720
    Quote Originally Posted by shortline10 View Post
    The 86/87 200x is a nice upgrade and it adds 2 inches to the width . 4x110 bolt pattern so its an easy wheel to find compaired to the 110 models 4x130 hub pattern .
    Now this may be a dumb question but do you mean 2 inches (2 + 2?) to both sides? Or 2 inches toatle added? (1 + 1?)



    Shorty
    "Your 4 wheeler must be fast because you were haulin' ass....UNTIL I passed you on 3 wheels"

    RIDE RED......OR RIDE HOME


    TRIKES ARE NOT DANGEROUS......IDIOTS ARE!

    RIP


    NOS_350X is the most bad-ass person in the world

  6. #6
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,788
    I believe its 7/8" gain for each hub !!!!!!!!!



    Quote Originally Posted by Shorty View Post
    Now this may be a dumb question but do you mean 2 inches (2 + 2?) to both sides? Or 2 inches toatle added? (1 + 1?)



    Shorty
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

//ArrowChat Integreation Code //