Using an 82 250R Durablue axle in a 200X 1st Gen....help

[ironchop]

so for those of you WHO HAVE ACTUALLY USED an early 250R Durablue axle in a 1st Gen 200X.....I need help

So I called Sprocket Specialists about ordering a 38T 250R sprocket for this axle (special order as the smallest they make is a 41T).....What I need to know is,were these rubber-isolated or can I bolt the sprocket right to the flange on this Durablue axle?

[shortline10]

Insulators were in the stock sprocket so if you buy aftermarket it prob will be with no insulators and yes you can bolt it up that way but you wont use the stock style bolts . The 83 atc185s is also the same sprocket bolt pattern to help with your search .

so for those of you WHO HAVE ACTUALLY USED an early 250R Durablue axle in a 1st Gen 200X.....I need help

So I called Sprocket Specialists about ordering a 38T 250R sprocket for this axle (special order as the smallest they make is a 41T).....What I need to know is,were these rubber-isolated or can I bolt the sprocket right to the flange on this Durablue axle?

[ironchop]

thanks, Mike....that`s exactly what i needed to know...much appreciation...I got the axle off KASEY and it doesn`t have isolators or anything and i couldn`t find pics of a Durablue setup with sprocket on it

[Dirtcrasher]

It fits, I used one on an 85 I sold...........