extended swingarm for a 2nd gen 250R

[hillbilly 200x]

Hi guy I was just wondering if any one made an extender swingarm for the 2nd gen 250R's. I am plaing on rebuilding my R over the winter and I want to have an old school racer look. I have the 3'' wheel spacer and a set of Carisle R/A on gold rims and a few other little thing. So all I would need is to find or make a extended swingarm. thanks for the help Aaron

[250rmanfmf]

I believe Westcoast made one. Most you will see on ebay and such will be custom built swingarms. That may be your best bet is to have a custom one built. It will cost around $500 but if a westcoast comes up it will probably go higher than 500 or around 500. HRE does some great work and I am having my +4 chromely custom Tecate swingarm built for around $550 with him.