Got The Holeshot
Arm chair racerJust too addicted
my uncle has a john deer amt 600 and i need to simply know how the fuel pump hooks up. i put one on it for him years ago but havent seen it since and he bought a new one since it stopped running. anyways, theres and IN (1 line from tank to pump) and two OUTS on the pump. one is a 90 degree and one is straight. I think he may have it hooked up wrong. Any pics or links would be greatly appreciated.
Tpc 450
86 250r
86 350x
86 200x
86 250sx
85 225DR
(2) 84 YTM
(3) 85 Atc 70
Got The Holeshot
Arm chair racerJust too addicted
i believe this is the pump, whats in, and whats out and to where do they go?
Tpc 450
86 250r
86 350x
86 200x
86 250sx
85 225DR
(2) 84 YTM
(3) 85 Atc 70
Got The Holeshot
Arm chair racerJust too addicted
BUMP! i know someone on here has one of these
Tpc 450
86 250r
86 350x
86 200x
86 250sx
85 225DR
(2) 84 YTM
(3) 85 Atc 70
At The Back Of The Pack
Arm chair racerFirst time rider
One is a vacuum line to open the blader inside there. I got one for a Honda moped they called it a petcock not fuel pump but to each there own. So he needs to figure out witch two are gas and one is vacuum line. Hope it helps Justin .
First Time Rider
Arm chair racerNew to the board
Im thinking the one in the middle is the vac, the one on the left goes to the carb, ,the one on the right goes to the fuel tank.
First Time Rider
Arm chair racerNew to the board
the shiny 90° on the right, is vacuum. that much I do know. the other 2 are in/out Fuel.
get your vac line hooked up, and if it doesn't run right switch the fuel lines at the pump.
First Time Rider
Arm chair racerNew to the board
Heres a pic of the same setup on a JD mower.
Reply With Quote