First Time Rider
Arm chair racerNew to the board
hello all, couple of questions. i found a 3 extended lonestar swinger for a 86/87 trx, what all do i need to make this work on my 1985 250r? my bike has a aftermarket extended axle right now, i dont know the manufacture, would i need to get a different axle also?and does this carb look stock, if anybody might now the size, im in the middle of redoing this trike. it was neglected and needed a good home
. any help would be great for this noob. i really want to make this nice, thanks again all.
Power User
Got the holeshot
The stock swing arm, looks to be extended.
The axle Is aftermarket.
The carb. Is larger than stock, might be a 36 / 38 / 39 mm.
Lonestar swing arm, will work with the axle.
The carrier & caliper will need to be '86.
Last edited by ceaserthethird; 07-07-2011 at 08:19 PM.
If you have Bought a item from me, Please leave me feedback
If your buying a item from me check my feedback
Click on link ~ http://www.3wheelerworld.com/showthr...ceaserthethird
Reply With Quote
