At The Back Of The Pack
Arm chair racerFirst time rider
They came off my 1984 200x so they have the 4x110 bolt pattern but what is the other bolt pattern to? I measured it and it seems to be 132mm. They say Dico on them and are 8" wheels. I'd like to know the name and what else they fit so when I sell them I can advertise it that way.
At The Back Of The Pack
Arm chair racerFirst time rider
I think some of the older honda used a 4 x 130 I think. Thats my guess. 1st generation ITP wheel, before there was a ITP. I'm not 100 percent but those may bolt up to some 200 and 185's. A diehard honda guy can tell you for sure.
"If you are going to piss like puppy, Don't Get Off The Porch"
Trikes:
84' Suzuki ALT185 (old Orange)
85' Yamaha 225DX, piped and spaced ( First Girlfriend)
Quads
87' Yamaha Banshee, built and very very fast (The Whore)
01 Yamaha Raptor 660, built and piped (The Beast)
03 Suzuki Vinson, 26's and piped (The Crowd Pleaser)
Once apon a time:
85' Tecate 300 alky flattacker, 6 in over swingarm, 88 Suzuki 500"Quadzilla"PIA , 91 Yamaha Warrior Built and Modded. (luved that Baby Tank)
Power User
Lord of the trike
Looks like an aftermarket uni-lug wheel... Made to fit honda or yamaha... (imo)
No trikes. Too old, too crippled. Unless I find one I can't live without!
"You cant fix stupid" ~ Ron White
My feeback link: http://www.3wheelerworld.com/showthr...ack-for-Thorpe
Got The Holeshot
Arm chair racerJust too addicted
hey, make a cardboard templet from the wheel.
then get a good measurement from that.
one cylinder is not enough!!
Power User
Catch me if you can
Well, it says "DICO" so I guess thats who made them and they have 2 bolt patterns.....
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
At The Back Of The Pack
Arm chair racerFirst time rider
Ya I'm trying to figure out the other bolt pattern tho. I used cardboard to get my measurements and 132 was what I got. I'll try again tomorrow and maybe I'll get a more common number.
Power User
Lord of the trike
My SX had a "Dico" front tire....Originally Posted by Dirtcrasher
No trikes. Too old, too crippled. Unless I find one I can't live without!
"You cant fix stupid" ~ Ron White
My feeback link: http://www.3wheelerworld.com/showthr...ack-for-Thorpe
Power User
The day begins with 3WW
I've been inside Dico back in the 80's. My mom bought me a set of 8" wheels and tires for my birthday. They didn't have polished aluminum wheels for the Tecate and being all of 15 I couldn't and wouldn't wait so I got gold anodized 8" wheels, they didn't match and still don't. Dico eventually turned into Dycorp and then closed it's doors. I think that they were loosely related to the Dick Cepek company.
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
Reply With Quote