Just Too Addicted
Arm chair racerJust too addicted
E-Start 200 series motors bolt up in a 1986 200s? My main concern is that if the E start will clear the frame and if the H/L box will have clearance also.
I'm 110% sure that the bolt pattern is the same. Its just the H/L box and the starter that worry me.
Shorty
RIDE RED......OR RIDE HOME
TRIKES ARE NOT DANGEROUS......IDIOTS ARE!
RIP
NOS_350X is the most bad-ass person in the world
First Time Rider
Arm chair racerNew to the board
Hi/Lo box should not be an issue but the starter certainly will. The E-series bikes have the same frame but it is factory "relieved" at the starter. You can achieve the same results with some heat and a.
At The Back Of The Pack
Arm chair racerFirst time rider
A BFH will work wonders, LOL
At The Back Of The Pack
Arm chair racerAt the back of the pack
i think the 200sx quad motors will fit right in if you get one that the starters ontop of the cases instead of infront.
1983 KLT 200 C
1978? YZ 125
1978 Panther 5000
1939 Farmall A, 51st farmall A ever produced.
1946 International A Industrial
1973 Ford F100
Power User
Got the holeshot
Unless you already have the engine, go Chinese (Lifan/Loncin) or CRF230 ($$).
Loncin in my 200x:
The link that inspired me (among others but this was the first I saw):
http://www.3wheelerworld.com/showthr...90-lifan-200cc
Power User
The day begins with 3WW
Said it before,but I'll say it again! Beautiful 200 X !!!! ^^^^
Reply With Quote