Anyone have input on using just one qt of oil during a change instead of the specified 1.1 qt.
Anyone have input on using just one qt of oil during a change instead of the specified 1.1 qt.
1984 200x
1985 250es
personally ive ran 1qt before but i buy in bulk now so i just through 1.1 in there because i can but ive never really noticed a difference
my 185s is on the high end of the dip stick with 3/4 of a quart, and i tip it up sideways, shake it , turn it over so a lot of oil drains out, a 200 should be fine off 1 quart
Why would you purposely run your machine low on oil? They dont hold much to begin with and 0.1 quart does not cost that much when you look at the price of a full quart. Being a tight ass will catch up with you some day.
my feedback thread http://www.3wheelerworld.com/showthr...-hoosierlogger
TRIKEFEST 11, 12, 13, 14, 15, 16
Current rides
Taurus 650 (green)
85 250es big red
83 ALT50 (5 year old daughters)
82 ALT50
82 ALT50
84 atc 70 stroked big bore 90 STILL in progress.
71 QA50
93 TRX 300 FW
You might be strong as an ox, but without a cart you are just a big dumb animal.
Agreed..the 1st place to 'go dry' if the oil is low is your rings. You really want to deprive your rings of lubrication on an engine that works as hard as the 200x, no matter how slight?
Before I head out for a hard day of riding I want to see my oil level at the top of the fill line..everytime.
Not sure I understand your reasoning..is this some advice you have been given?
Current toys..
1986 Honda 350X..trail bomb!
1985 Honda 250SX..my main mudder
1985 Honda 250ES..Back in Black Trike
Current non-trike toys:
1990 Honda TRX300FW
1995 Seadoo GTX
1998 Polaris Indy Lite 340(Nearly new looking)
1998 Polaris Touring 500
1998 Club Car (electric)
A veteran is someone who, at one point in his life wrote a blank check Made payable to 'The United States of America' for an amount of 'up to and including my life.' That is Honor, and there are too many people in this country who no longer understand it.
Use the dip stick for your particular trike to determine how much oil to use
Rob
oil should also be checked with the dipstick on top of case.... Meaning do not screw it down to check it.
oil should also be checked with the dipstick on top of case.... Meaning do not screw it down to check it.
are you sure about that?
TRIKES....BADDD ASSS BIKES!!
1986 200x
1995 300ex
2000 400ex
1989 CR80
1996 CR 250R
1997 XR 70
1977 YAMAHA XS500
1989 KITTY CAT
my feedback thread http://www.3wheelerworld.com/showthr...-hoosierlogger
TRIKEFEST 11, 12, 13, 14, 15, 16
Current rides
Taurus 650 (green)
85 250es big red
83 ALT50 (5 year old daughters)
82 ALT50
82 ALT50
84 atc 70 stroked big bore 90 STILL in progress.
71 QA50
93 TRX 300 FW
You might be strong as an ox, but without a cart you are just a big dumb animal.
I agree that oil should be checked without screwing the dip stick in but I was just wondering if anyone had issues running just 1 qt in stead of the 1.1 per the manual. I always have run 1.1 but just figured I would ask instead of having to open a second qt just for the .1 but will continue to do so from the recent comments.
Thanks
1984 200x
1985 250es
As a Honda tech I am asked a similar question several times a week. We usually pour the specified amount in, then check it and fill if necessary. This way it's always on the full mark and u know it's good. But it's usually always got the specific amount the book calls for in order to be full on the stick. And no Honda has ever been checked by screwing the stick in. All bikes, atvs, and even power equipment and engines are checked the same.
1985 ATC250ES Big Red, Low Hours,
1983 ATC185 200S jug, need crankcase or for sell
1985 ATC110 Stock, Hondaline headlight guard
1982 ATC70 Fun
IT'S A HONDA