Results 1 to 3 of 3

Thread: Kick start lever screw always strips on me,.. -_-

  1. 08-05-2011, 02:01 PM #1
    HondaClaw's Avatar
    HondaClaw
    HondaClaw is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jul 2011
    Location
    Southern VT
    --
    179

    Kick start lever screw always strips on me,.. -_-

    I've had to transfer a kick start lever to my 300 from a 250 twice and each time when I take the lever off I usually remove the screw that keeps the lever tight to the splines off all the way, and when I go to tighten it it never seems as tight as it was before I took it off.. Like the 2 ends of the circular part with the splines on the lever never meet each other and I don't think the lever is gripping the shaft tightly enough now. Anything I am doing wrong?? I believe it also is ruining the threads on the inside of the lever..
    Reply With Quote Reply With Quote
  2. 08-05-2011, 07:53 PM #2
    Dirtcrasher's Avatar
    Dirtcrasher
    Dirtcrasher is offline Power User Catch me if you can
    Join Date
    Oct 2002
    Location
    Northeast
    --
    17,460
    Sounds like the kicker is a MM too large, no????????????
    All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
    Reply With Quote Reply With Quote
  3. 08-05-2011, 09:44 PM #3
    HondaClaw's Avatar
    HondaClaw
    HondaClaw is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jul 2011
    Location
    Southern VT
    --
    179
    Well seeing how it is for a trx 300, I assumed it would fit my trx 300 :P oh well maybe I'm just stupid I f'ed up my 250's kick start lever that way, I stripped the screw and the kick start lever
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //