First Time Rider
Arm chair racerNew to the board
i got a set of 250sx tripple trees and found a good set of forks but the forks are probably 1 or 2mm smaller than the sx forks so they wouldnt be tight in the tripple trees so i made the gap between the fork clamps bigger and they fit tight do you guys think they would be okay to use
Power User
Catch me if you can
Wait a second, you say there smaller.
Then you say "made the fork clamp gap bigger" to fit them in. Which would mean that they are larger diameter forks, I'm lost.
You are crazy shimming or spreading upper/lower triples to fit the wrong fork. SX forks are chicken to find..............
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
Lord of the trike
What SX front end parts do you need? I have a complete front sitting in my way, out in the garage...
No trikes. Too old, too crippled. Unless I find one I can't live without!
"You cant fix stupid" ~ Ron White
My feeback link: http://www.3wheelerworld.com/showthr...ack-for-Thorpe
First Time Rider
Arm chair racerNew to the board
dircrasher i made the slot where the bolts tighten the clamp bigger so they could close more when i tightened the bolts also where i live in canada trikes are uncommon so parts are hard to come by im just trying to make what i have work but thanks for the reply and thorpe i think it might cost alot to ship the front end here but i apreciate you trying to help
Reply With Quote