Results 1 to 4 of 4

Thread: need help can't get 200x to idle right it races and stalls

  1. #1
    Join Date
    Aug 2011
    Location
    tazewell tn us
    --
    1

    need help can't get 200x to idle right it races and stalls

    i got a 85 honda 200x it won't idle right it idles high and if i shake bike the idle drops when riding it sticks at high idle until i goose it then drops it will stall when riding i also noicted gas leaking out of the overflow tube any ideas thanx

  2. #2
    Join Date
    May 2006
    Location
    N.E. Ohio
    --
    2,002
    Bad float springs(leaking), intake leak from the carb to the motor causing stall while stabbing the gas.

  3. #3
    Join Date
    Jul 2010
    Location
    O.C., Oregon
    --
    921
    Check float....
    1985 250r-LED Performance 4mm Stroker motor
    1978 ATC70 w/ Piranha 140cc
    1972 - K1 - CT70 w/lifan 125cc
    2017 YZ 250x- Braap

    Youtube channel = http://www.youtube.com/user/ter5678/videos

  4. #4
    Join Date
    Oct 2010
    Location
    Lauderdale County, Alabama
    --
    2,029
    Check the O-Ring on the intake manifold where it goes onto the engine. If that is bad it'll cause a lean condition. Always good to check em each time you take the carb off.
    This is my trike. There are many like it but this one is mine. My trike is my best friend, and it is my life. I must master it as I must master myself. My trike without me is useless. Without my trike, I am useless. I must ride my trike true. My trike and I know that what counts is not the amount of miles we ride, but the time we ride together. My trike is human in it's own ways, therefore I will learn it as my brother. I will learn it's weaknesses, it's strengths, it's parts, and it's soul.

//ArrowChat Integreation Code //