Need a suggestion on broken exhaust bolt. 350x

[oscarmayer]

hey ya Dr, You can but those studs a ton of places. the hardware store has some, (ace and maybe the auto parts stores). It's a standard stud the same as the other honda bikes. I may even have some in my garage. not SS but mild steel that are black will work fine. I liek to use the copper anti-size for them as it keep sthem from binding together and the copper handles heat better. if you do not have copper stuff, then use malox. YES it's an old skewl trick. it works.

[bhillis99]

UPDATE! Ok I know this is a long shot, but it worked. I found the bolt on service Honda, typed up the part number. I had soaked the bolt for 7 days straight, we got a star headed socket and ed it on the bolt, hooked a extension and low and behold it spun right out without any damage. I know I should soaked them before I even tried to take the exhaust off and the engine should have been warm, its a mistake I will never make again. Sorry to get you guys upset, but I was an idiot and learning makes perfect. If yall need any help on taking the exhaust off or how to change the clutch, just let me know.