Yep, that sounds correct. O-ring, then washer/screw. Its easier to put the spring and washer on the screw and install them together
I'm your dingleberry
The day begins with 3WW
Yep, that sounds correct. O-ring, then washer/screw. Its easier to put the spring and washer on the screw and install them together
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
New to the board
Arm chair racerNew to the board
Ok will do. Sounds like you have been around the atc's and atv's for awhile... Still learning about these and their woes. Always been more of a car guy but enjoy tinkering with anything mechanical. Hoping the motor on this other one (86 125m) I bought is good...Took the carb off and cracked it open the same time I took off this 200's. It had oil or or just some real old gas that turned thick in the bowl. The tank I dropped off to have hot tanked and coated today was dry as a bone and had that kreme stuff someone tried using long ago. The thing has been setting for 2-3 years so having to get the cables freed up or replaced etc. Just kind of concerned me when I saw the oil or whatever it is in the bowl But worst case scenario just rebuild the motor and hop it up a little in the process lol.
Reply With Quote